Professor Vice Director, National Engineering Research Center of Flat Rolling Equipment
Chief Engineer, Design and Research Institute of USTB Company Ltd.
OFFICE 605 Keji Building
PHONE 0086-10-62332598-6605
FAX 0086-10-62332947
EMAIL yuwei@nercar.ustb.edu.cn
RESEARCH INTERESTS
New method of materials processing, Simulation, Tansformation, Microstructure and property control, Heat transfer research and application, Design and preparation fof metal based composite
More than 40 Ph.D. or M.D. students graduated from the team.
EDUCATION
2001.09-2008.06 Ph.D. in Materials Forming Engineering, University of Science & Technology Beijing
1990.09-1993.04 M.S. in Metal Plastic Forming, University of Science & Technology Beijing
1982.09-1986.07 B.A. in Metal forming, College of Iron & Steel Wuhan (Predecessor of Wuhan University of Science & Technology)
2012.03-2012.09 Visiting Scholar to Ohio State University
PROFESSIONAL EXPERIENCE
1993.07-2002.08 Assistant professor, University of Science & Technology Beijing
2002.09-2018.08 Associate professor, University of Science & Technology Beijing
2018.09- Professor, University of Science & Technology Beijing
AWARDS & HONORS
1. The 1st Class of the Jiangxi Province Prize for Progress in Science and Technology in 2008.
2. The 2nd Class of the Jiangsu Province Prize for Progress in Science and Technology in 2009.
3. The 2nd Class of the Fujian Province Prize for Progress in Science and Technology in 2012.
4. The 3st Class Prize in Metallurgical Science and Technology in 2011.
5. The 3st Class Prize in Metallurgical Science and Technology in 2013.
6. The 3st Class of the Hebei Province Prize for Progress in Science and Technology in 2018.
RESEARCH PROJECTS
1. Corrosion behavior and mechanism of high strength corrosion resistant car body and high speed bogie frame steel (2017YFB0304602), 2017-2021
2. Development and Industrialization of large coil weight, low cost and high quality titanium strip industrialized complete manufacturing technology (2016YFB0301204), 2016-2020
3. Development of high performance wear resistant steel (2012AA03A508), 2012-2017
4. Precipitation mechanism and control method of unit nanometer in ferrite-based Ti-Mo microalloyed steel (51274036), 2012-2015
5. Technology of titanium and titanium alloy titanium strip series products, 2016-2020
6. Rolling process and performance control of large diameter titanium alloy seamless pipe, 2014-2019
7. Research and development of high quality special steel bar products series, 2017-2020
8. Hot rolling process in ferrite region of IF steel, 2017-2019
9. Key technology of hollow steel rolling, 2013-2015
10. Rolling process of laminated composite Damascus steel, 2013-2015
11. Surface oxidation and control of hot rolled steel, 2015-2016
12. Bar rolling and cooling process and equipment, 2003-2019
13. Controlled cooling process and equipment for sheet and strip, 2003-2012
14. New controlled rolling process and intermediate cooling device for plate and strip, 2003-2012
15. Heavy thickness bridges and high-building steel plates, 2010-2012
16. R&D of High/super high strength marine plate steel of A32-F690 grade, 2008-2010
17. R&D of high strength construction machinery steel (Q500-Q1000), 2008-2010
18. R&D of process and product of 9Ni590B container steel, 2011-2013
19. R&D of 610E grade container plate and direct quenching process, 2006-2008
20. R&D of X70-X120 pipeline steel, 2003-2011
21. Effect of hot rolling on microstructure and texture of non-oriented silicon steel, 1999-2001
22. On-line normalization process for N80 oil casing, 1993-1997
PATENTS & PUBLICATIONS
1. Wei Yu, Qingwu Cai Song Yong, Sun Jiquan, He Chunyu. Principle and Application on Microstructure and Property Control of Hot Rolled –Principle, Process and Equipment [M], Metallurgy Industry Press, 2016, 10.
2. Chen Yulai, Wei Yu, Qingwu Cai. Physical Metallurgy Principle and Application on Microstructure and Property Control of Hot Rolled Plate and Strip Products [M]. Metallurgy Industry Press, 2017, 5.
3. Entao Dong, Wei Yu, Qingwu Cai, Lei Cheng, Zhen Ning, Jiaxin Shi. High temperature deformation behavior of TiNiNb hypoeutectic alloy [J]. Materials Science & Engineering A, 2019,764(7): xxxx
4. Yu Wei , Wang Jun, Liu Tao. Evolution and Application of Oxidation and Surface Quality Control of Hot Rolled Steel Products [J]. Steel Rolling, 2017, 34(03): 1-6.
5. Dong Entao, Yu Wei , Cai Qingwu. Alpha-case kinetics and high temperature plasticity of Ti-6Al-4V alloy oxidized in different phase regions [J]. Procedia Engineering, 2017, 207, p2149-2154
6. Yuwei Wang, Qingwu Cai, Gaosheng Li, Wei Yu. Effects of Reduction Pretreatment on the Internal Quality of Casting Billets [J]. Steel Research International. 2017, 88(6): 1-6.
7. Li Gaosheng, Yu Wei *, Cai Qingwu, et al. Effect of gradient temperature rolling (GTR) and cooling on microstructure and properties of E40-grade heavy plate [J]. Archives of Civil and mechanical engineering, 2017,17(1):121-131
8. Entao Dong, Wei Yu, Qingwu Cai, et al. High-Temperature Oxidation Kinetics and Behavior of Ti–6Al–4V Alloy [J]. Oxidation of Metals, 2017, 88(6): 719–732.
9. Li Gaosheng, Yu Wei, Cai Qingwu. Investigation of the Evolution of Central Defects in Ultra-Heavy Plate Rolled Using Gradient Temperature Process[J], METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (2):831-840
10. Yu Wei, Wang Ban, He Jie, Xu Shixin, Lei Liqi. Hot Rolled Proces of Multilayered Composite Metal Plate [J]. Materials Engineering, 2017, 45(02):32-38.
11. Yu Wei, Li Gaosheng, Cai Qingwu. Q345 Ultra-Heavy Plate Rolled with Temperature Gradient [J], MATERIALS AND MANUFACTURING PROCESSES. 2015, 30 (1): 104-110
12. Li Gaosheng, Yu Wei, Cai Qingwu. Investigation of reduction pretreatment process for continuous casting [J], JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 227:41–48.
13. Yu Wei, Xie Bao-sheng, Wang Ban, Cai Qingwu, Xu Shixin. Effect of Rolling Process on Microstructure and Properties of 95CrMo Drill Steel [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23(9):910-919.
14. Wang Yi Fa, Yu Wei, Xuan Kang Le, Li Ming Hui. Numerical Simulation of Interlayer Pressure of Hot Rolled Steel Coil during Cooling Process [J]. JOURNAL OF PLASTICITY ENGINEERING, 2017, 24 (03): 43-49.
15. Yu Wei, Wang Yi fa, Li Minghui, Xuan Kang Le. Strategy of Discrete Edge Masking in the Laminar Cooling Process of Hot Rolling Strip [J]. JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY, 2016, 48(11):147-154.
16. Yu Wei, Wang Yifa. Relationship between Cooling Parameters and Warping of Hot Rolled Strips [J], JOURNAL OF ENGINEERING SCIENCE, 2016, 38(12):1734-1740
17. Yu Wei, xiong Jiaze, Lei Liqi, Wang Zhu sheng. Core Rod Deformation Principle of Rolled Coaxial Composite Bar [J], JOURNAL OF IRON AND STEEL RESEARCH, 2016, 28(8):33-38.
18. Yu Wei, Li Gaosheng, Cai Qingwu. Effect of a novel gradient temperature rolling process on deformation, microstructure and mechanical properties of ultra-heavy plate[J], JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 217 (3): 317-326
19. Yu Wei, Xu Shixin, Wang Ban, Xie Baosheng, Lei Liqi, Zhang Yi. Direct Heat Treatment Process Experiment of 22CrNi3Mo Ultra High Strength Steel [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2015, 36 (7):48-54.
20. Yu Wei, Xu Lixiong, Zhang Yi, Wang Ban, He Chun yu, Dong Entao. Constitutive equation for high temperature flow stress of 95CrMo steel [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2015, 36 (10):261-267
21. Yu Wei, Sun Guangjie, Zhang Fei. Experimental Study of Continuous Annealing Process for Cold Rolled TRB Sheet [J], JOURNAL OF BEIJING UNIVERSITY OF TECHNOLOGY , 2015, 41 (2):293-298
22. Yu Wei, Wang Xiao, He Bo, Xie Baosheng. Effect of isothermal time in bainite transformation region on microstructure and mechanical properties of hot-rolled TRIP steel [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2015, 36 (2):132-136.
23. Li Gaosheng, Yu Wei, Cai Qingwu. Finite element simulation and experimental investigation of temperature gradient rolling for ultra-heavy plates [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY , 2014, 36(10):1322-1327, 2014,10
24. Yu Wei, Wang Xiao, Cai Qingwu, He Chunyu. Continuous cooling transformation behaviour and mechanical properties of hot rolled TRIP steel [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2014,35(5):97-103, 2014,5
25. Yu Wei, Qi Yue, Li Liang, Sun Guangjie, Wang Decheng, Dong Changzhen, Effect of cooling process after normalizing on the microstructure and properties of 1600 MPa ultra-high strength steel [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY, 2014, (01):56-62
26. Yu Wei, Sun Guangjie, Forward slip theoretical model and simulation for variable gauge rolling of TRB sheet [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY , 2014, (02):241-245
27. Yu Wei, Sun Guangjie, Zhang Fei, Roll gap setting model and experiment for rolling sheet with variable gauge zone [J], Material Science and Technology , 2014, (03):41-45
28. Zhang Zhimin, Yu Wei, Cai Qingwu. Method for determination of heat transfer coefficient of plate during roller quenching [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2013,34(03):171-175
29. Yu Wei, Chen Tao, Jiao Duotian, Wu Huibin. Effect of Quenching and Partitioning Process on MA Constituent in Nb-Bearing HSLA Steel [J], Journal of Wuhan University of Technology-Materials Science Edition, 2012, 27(1):21-26.
30. Yu Wei, Zhang Lei:Effect of Rolling Temperature on the Properties of Al/Q345 Composite Plate [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY, 2013, 34(1):170-175.
31. Yu Wei, Zhang Lei, Chen Yinli, Xie Li, Effect of Cumulative Rolling Reductio on the Properties of Al/Q345 Composite Plate[J], Materials for MECHANIC ENGINEERING, 2012, (9):78-81.
32. Xu Lishan, Yu Wei, Zhang Yeming, Lu Xiaojie, Microstructure and Mechanical Properties of Low Carbon Bainite Steel Treated by Quenching and Tempering[J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY, 2012,(2):125-131
33. Wang Hemu, Yu Wei, Cai Qingwu, Experimental study of heat transfer coefficient on hot steel plate during water jet impingement cooling, Journal of Materials Processing Technology, 2012, 212(9):1825-1831
34. Yu Wei, Xie Li, Wu Huibin, Effect of Induction Heating Temper on Microstructure and Mechanical Properties of X120 Pipeline Steel [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2012, (02):56-61
35. Yu Wei, Lu Xiaojie, Hang Xudong, Chen Yinli, Xu Yaowen, Transformation and Stress Evolution in Hot Rolled Strip Coil of X70 Pipeline Steel in Cooling Process [J], JOURNAL OF BEIJING UNIVERSITY OF TECHNOLOGY, 2013, 39(02):269-274+279
36. Yu Wei, Zhang Zhimin, Liu Tao, Cai Qingwu, Grain Growth and Its Control Method of Intermediate Slabs for Plates During Cooling Processes [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY , 2012, (09):1006-1010
37. Yu Wei, Chen Yinli, Xu Lishan, Cai Qingwu, Microstructure and Mechanical Properties of High Strength Steel after Direct Quenching and Partitioning [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2012, (04):62-67
38. Yu Wei, Zhang Yeming, He Chunyu, Xu Lishan, Cai Qingwu, Production of Heavy-Gauge Steel Plates by Cad Rolling Process [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY , 2011, (11):1391-1395
39. Yu Wei, Chen Yinli, Lu Xiaojie, Yield Stress and Young’ s Modulus of Acicular Ferrite Steel at High Temperature [J], TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2011, (11):48-52.
40. Yu Wei, Lu Xiaojie, Chen Yinli, Xu Yaowen, Effect of Coiling Temperature on Residual Stresses in Hot Rolled X70 Pipeline Steel Strips during Laminar Cooling [J], JOURNAL OF BEIJING UNIVERSITY OF SCIENCE AND TECHNOLOGY , 2011, 33(06):721-726
41. Yu Wei, Qian Ya-jun, Wu Hui-bin, Yang Yue-hui, Effect of Heat Treatment Process on Properties of 1 000 MPa Ultra-High Strength Steel[J], Journal of Iron and Steel Research International, 2011, 18(2):64-69
官方公众号
