Professor Director,

Department of Materials Processing and Engineering, Engineering Research Institute,University of Science and Technology Beijing

OFFICE 508A Keji Building

PHONE +86-10-62332598-6508

FAX  +86-10-62332947

EMAIL  Jianght@ ustb.edu.cn

RESEARCH INTERESTS

Development of Low Alloy Structural Steel and Special Steel

Development of New Nonferrous Metals including Magnesium, Titanium and Aluminum Alloys

Rolling, Forging, Welding and Heat Treatment Technology

Microstructure and Property Control of Materials

EDUCATION

2016.3-2016.9Visiting Scholar to University of North Texas (UNT)

2001.03-2004.05, PhD candidate, School of Materials Science and Engineering, Northwestern Polytechnical University (NWPU)

1998.09-2001.03, master candidate, School of Aeronautical Manufacturing Engineering, Nanchang Aviation University (NAU)

1994.09-1998.07, bachelor candidate, School of Aeronautical Manufacturing Engineering, Nanchang Aviation University (NAU)

PROFESSIONAL EXPERIENCE

2006.04-, National Engineering Research Center of Advanced Rolling, University of Science and Technology Beijing

2004.05-2006.03, postdoctoral researcher, School of Materials Science and Engineering, University of Science and Technology Beijing

AWARDS & HONORS

1. The scientific and technological progress award in Hebei province for the Innovation and Application of Key Technologies for High-Level Automotive Plate project, first prize, 2009

2. The metallurgy scientific and technological progress award for the high grade X70 and X80 hot rolling pipeline steel project, second prize, 2009

3. The scientific and technological progress award in Anhui province for the high grade X70 and X80 hot rolling pipeline steel project, first prize, 2009

RESEARCH PROJECTS

1. Aviation Science Foundation: Research on Strengthening Mechanism and Fracture Mechanism of Friction Stir Welding of Spray Formed Aluminum Alloy

2. Hunan Hualing lianyuan iron and steel group co.LTD project: Development of High Aluminum and High Strength Cold Rolled Steel Plate under batch annealing process

3. Maanshan Iron and Steel Co., Ltd：Optimizing the Use Technology of CSP Roll Gap Lubrication

4. Tangshan Iron and Steel Co., Ltd.：Study on Surface Morphology Control and Coating Mechanism of High Quality Cold Rolled and Galvanized Steel Plates

5. Yonggang Iron and Steel Co., Ltd.: Improve the quality of bar products by rolling instead of forging

6. Yonggang Iron and Steel Co., Ltd.: Key Problems of Surface Quality Concerning Oxide Layer of Wire and Rod Steel

7. Jintian Titanium Metal Co., Ltd.: Study on Surface Polishing, Cutting and Forming Properties of Titanium Plate

8. Yunnan Aerospace Shenzhou Automobile Co., Ltd.: Establishment and optimization of finite element model for aluminium alloy connection

9. 135 Key R&D Program: Modeling and Analysis of Multi-material Connections, Fatigue Design and Performance Evaluation and Method

10. 135 Key R&D Program: Key Technologies for Formation and Application of Ultra-High Strength Steel Automotive Parts

11. State Natural Sciences Foundation of China: Carbon diffusion control and microstructure evolution model during the fabrication process of Q&P steel

12. The central university basic business expenses: Carbon diffusion control and its deformation mechanism during the fabrication process of the Medium Manganese Q&P Steel

13. Five-year science and technology support plan: The rolling technological development of magnesium alloy plate with high efficiency at low cost

14. Science and technology project in Guangdong province: The development and industrialization investigation of high quality automobile steel

15. 863 plan: Ultra-high strength and toughness steel based on the principle of stacking fault and twinning

16. Beijing municipal science and technology commission project: The key technological research of the cold-rolled high quality galvanized sheet

17. Beijing municipal science and technology commission project: The development and industrialization of magnesium alloy plate and coil with high strength and toughness and high formability

18. Maanshan iron and steel group co., LTD project: The development and investigation of X42-X80 oil and gas pipeline steel

19. Maanshan iron and steel group co., LTD project: The development and investigation of X100 oil and gas pipeline steel of Magang

20. Wuhan iron and steel group co., LTD project: The development of 800MPa grade dual phase steel TRIP steel and production process simulation system of automotive steel

21. Handan iron and steel group co., LTD project: Development of the automotive steel series

22. Handan iron and steel group co., LTD project: The production technological development of the new generation advanced high strength automotive steel

23. Hunan Hualing lianyuan iron and steel group co. LTD project: The whole process technology research and product development of super deep drawing IF steel

24. Hunan Hualing lianyuan iron and steel group co.LTD project: Mechanical properties testing and application technology research of automotive steel sheet

25. Laiwu iron and steel group co., LTD project: The organizational performance research and process experiments of the hot-rolled black steel

26. Laiwu iron and steel group co., LTD project: Mechanical property analysis of high strength automotive steel with high phosphorus content

27. Tianjin cable factory project of north China: Mechanical property research and production process experiment of high quality low oxygen copper rod

28. Foshan lanshi space star stainless steel co., LTD. Project: Cold rolling technology development of TA2 titanium coil and the basic weld experimental research of the welded TA2 pipes

29. Beijing institute of aviation materials project: The heat exposure experiment and mechanical property of TC4 casting titanium alloy

30. Beijing institute of aviation materials projects: Heat exposure experiment and its oxidation behavior of Ti3Al alloy

PATENTS & PUBLICATIONS

1. Tian S, Jiang H, Guo W, et al. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy[J]. Intermetallics, 2019, 112: 106521. SCI

2. Guo W, Jiang H, Wang S, et al. Self-sharpening ability enhanced by torque gradient in twisted tungsten-fiber-reinforced Cu-Zn matrix composite[J]. Journal of Alloys and Compounds, 2019, 794: 396-401. SCI

3. Wang J, Mi Z, Jiang H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. Journal of Materials Science, 2019, 54(8): 6608-6623. SCI

4. Kang Q, Jiang H, Kuai Z, et al. Optimization of the hot compression constitutive equation and processing map of Mg-4Zn-0.8 Ca (wt.%) alloy[J]. Materials Research Express, 2019. SCI

5. Xu M, Li H, Jiang R, et al. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. Journal of Iron and Steel Research International, 2019, 26(2): 173-181. SCI

6. Zhang Y, Jiang H, Wang Y, et al. Effects of alloying addition and twin-roll casting process on Mg-2Zn based-alloys with high strength and high formability[J]. Materials Research Express, 2019. SCI

7. Wang J Y, Jiang H T, Duan X G, et al. Orientation and microstructure topology-governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. Materials Science and Engineering: A, 2019, 739: 254-263. SCI

8. Duan X, Mi Z, Jiang H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. Materials Research Express, 2019. SCI

9. Haitao Jiang, Guihua Zhang, Wenqi Guo. Deformation Behavior of Ti2AlNb-Based Alloy during Dynamic Compression[J]. Advanced Engineering Materials, 2018: 1800281.SCI

10. Qiang Kang, Haitao Jiang, Yun Zhang, Zhe Xu. Effect of various Ca content on microstructure and fracture toughness of extruded Mg-2Zn alloys. Journal of Alloys and Compounds, 2018, 742: 1019-1030. SCI

11. Haitao Jiang, Shiwei Tian, Wenqi Guo, Guihua Zhang. Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression. Materials Science & Engineering A, 2018, 719: 104-111. SCI

12. Kang, Qiang, Jiang, Haitao, Zhang, Yun. Microstructure, mechanical properties and stretch formability of Mg-3Al-0.5Ca-0.2Gd alloy processed at various finish rolling temperatures, MATERIALS RESEARCH EXPRESS, 2018,5(4). SCI

13. Zeng, Shangwu, Zhao, Aimin, Jiang, Haitao. Evolution of Surface Morphology of Oxide Formed During Initial-Stage Oxidation of gamma-TiAl Alloy Using In Situ Environmental SEM. OXIDATION OF METALS, 2018, 90(5-6):649-655. SCI

14. Guo, Wenqi, Jiang, Haitao, Tian, Shiwei), Zhang, Guihua. Nanoscale Twinned Ti-44Al-4Nb- 1.5Mo-0.007Y Alloy Promoted by High Temperature Compression with High Strain Rate. METALS, 2018, 8(8):619. SCI

15. Yang, Yonggang, Mi, Zhenli, Liu, Siyang, Li, Hui, Li, Jun, Jiang, Haitao. The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel. METALS, 2018, 8(6):432. SCI

16. Xu, Mei, Mi, Zhenli, Li, Hui, Tang, Di, Jiang, Haitao. Deformation mechanism transition in Fe-17Mn-0.4C-0.06V TWIP steel with different strain rates. MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34(2):242-251. SCI

17. Haitao Jiang, Yun Zhang, Qiang Kang. The influence of Ca and Gd microalloying on microstructure and mechanical property of hot-rolled Mg-3Al alloy[J]. Procedia Engineering, 2017, 207: 932-937. SCI

18. Haitao Jiang, Shangwu Zeng, Shiwei Tian, et al. Microstructural Evolution and Dynamic Recrystallization Behavior of β–γ TiAl based Alloy during Hot Compression[J]. Advanced Engineering Materials, 2017, 19. SCI

19. Zhichao Li, Ning Dang, Haitao Jiang, Zhenhai Xia. Influence of Temperature on the Texture Distribution in Two-Phase Region Hot Deformation of Grain-Oriented Silicon Steel. Journal of Materials Engineering and Performance. 2017, 26(11): 5439-5445. SCI

20. Zhichao Li, Ning Dang, Haitao Jiang, Zhenhai Xia. Mechanism of Texture and Precipitates Evolution in CGO Silicon Steel During High-Temperature Annealing Process. Journal of Materials Engineering and Performance. 2017, 26(11): 5432-5438. SCI

21. Zeng, Shangwu, Zhao, Aimin,Luo, Luo, Lin,Jiang, Haitao, Zhang, Lei. Development of beta-solidifying gamma-TiAl alloys sheet. MATERIALS LETTERS. 2017, 198:31-33. SCI

22. Haitao Jiang, Peng Dong, Shangwu Zeng, et al. Effects of Recrystallization on Microstructure and Texture Evolution of Cold-Rolled Ti-6Al-4V Alloy[J]. Journal of Materials Engineering & Performance, 2016, 25(5):1931-1938.

23. Haitao Jiang, Shangwu Zeng, Aimin Zhao, et al. Hot deformation behavior of β phase containing γ-TiAl alloy[J]. Materials Science and Engineering: A, 2016, 661: 160-167.SCI

24. Peng Liu, Haitao Jiang, et al. The effect of Y, Ce and Gd on texture, recrystallization and mechanical property of Mg–Zn alloys[J]. Journal of Magnesium and Alloys, 2016, 4(3): 188-196.SCI

25. Haitao Jiang, Qiang Kang, Xiaoqian Yan. A novel diffusion model considering curvature radius at the bonding interface in a titanium/steel explosive clad plate. International Journal of Minerals, Metallurgy and Materials, 2015, 22(9):956-965. SCI

26. Shangwu Zeng, Aimin Zhao, Haitao Jiang. Oxidation of conventional and nanostructured 8wt.%yttria-stabilized zirconia coating surface coatings on γ-TiAl. Applied Surface Science, 2015, 332(30):362-367. SCI

27. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan. Effect of Heat Treatment on the Microstructure and Mechanical Property of Ti-steel explosive-rolling clad plate. Transactions of Nonferrous Metals Society of China, 2014, 24(3):697-704. SCI

28. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan, Shangwu Zeng. Microstructure and Mechanical Properties of HIP-ZTC4 during Thermal Exposure and Tensile Deformation, Rare Metals, 2014, 1-6. SCI

29. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan, Shangwu Zeng. Influence of Asymmetric Rolling Parameters on the Microstructure and Mechanical Properties of Titanium Explosive Clad Plate, RARE METAL MAT ENG, 2014, 43(11):2631-2636. SCI

30. Shangwu Zeng, Aimin Zhao, Haitao Jiang, Xiang Fan, Xiaoge Duan, Xiao-qian Yan. Cyclic oxidation behavior of the Ti-6Al-4V alloy. Oxidation of Metals, 2014, 81(3-4):467-476. SCI

31. Shangwu Zeng, Aimin Zhao, Haitao Jiang, Xiaoqian Yan, Jixiong Liu, XiaogeDuan. High temperature deformation behavior of Titanium clad steel plate. Rare Metals, 2014, 1-6. SCI

32. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan. Effect of heat treatment on microstructure and mechanical property of Ti–steel explosive-rolling clad plate. Transactions of Nonferrous Metals Society of China, 2014, 24(3): 697-704. SCI

33. Hai-tao Jiang, Bao-tong Zhuang, Xiao-ge Duan, Yan-xin Wu, Zheng-xu Cai. Element Distribution and Diffusion Behavior in Q&P Steel during Partitioning. International Journal of Minerals, Metallurgy and Materials. 2013, 20(11): 1050-1059.

34. Zhen-li Mi, Hai-tao Jing, Hai-tao Jiang, Di Tang, Yan-xin Wu. Work Hardening Behavior of Fe-Mn-si-Al and Fe-Mn-C TWIP Steels. Journal of University of Science and Technology Beijing, 2013, 35(4):465-473.

35. Zhen-li Mi, Jing-yi Jiao, Hai-tao Jiang, Zhi-chao Li, Sheng Liu. Effect of Annealing Process on Microstructure and Property of 00Cr20Al6 Ferritic Stainless Steel. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2013, 34(06): 84-88.

36. Hai-tao Jiang, Le-le Dai, Zhi-chao Li, Lu-zhao Duan, Hong-xiang Yin, Jin-xing Jiang. Effect of Intercritical Annealing on Microstructure and Performance of Hot-rolled Medium Manganese Steel Plate. RANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2013, 34(07): 100-105.

37. Hai-tao Jiang, Lu Sun, Zheng-xu Cai, Cheng-gang Zhang. Effect of Pre-heat Treatments and Cold Rolling Reduction on Recrystallization Texture of 6082 Aluminum Alloy. RANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2013, 34(08): 80-84.

38. Zheng-xu Cai, Di Tang, Hai-tao Jiang, Zhao Ma. Influence of Gd Concentration on Texture and Stretch Formability of Rolled Mg-Zn-Gd Alloys at Room Temperature. RARE METAL MAT ENG. 2013, (10): 2073-2078.

39. Xiao-qian Yan, Hai-tao Jiang, Shang-Wu Zeng, Ji-xiong Liu, Xiao-ge Duan. Effect of Heat Treatment on Microstructure and Properties of Titanium/steel Rolling Clad Plate. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2013, (SupplementⅠ): 77-81.

40. Hai-tao Jiang, Hui Xu, Zheng-xu Cai, Jian-hua Liu. Study on Microstructure Converting of Copper Rods for Electrical Engineering Produced by SCR. Hot Working Technology, 2013, 42(11): 30-32.

41. Hai-tao Jiang, Hui Xu, Zheng-xu Cai. Study on Surface Oxidation Discoloration of Copper Rods for Electrical Engineering Produced by SCR. Hot Working Technology, 2013, 42(15): 20-21.

42. Hai-tao Jiang, Chun-jie Lu, Xiao-ge Duan, Di TANG, Zhi-chao Li. Hot Deformation Processing Map of AZ31 Magnesium Alloy and Its Application. Journal of University of Science and Technology Beijing, 2012, (07): 808-812.

43. Bao-tong Zhuang, Di Tang, Hai-tao Jiang, Zhen-li Mi. Microstructural Evolution in Quenching & Partitioning Steel during Partitioning Process. Journal of University of Science and Technology Beijing, 2012, (11): 1288-1293.

44. Ji-xiong Liu, Ai-min Zhao, Hai-tao Jiang, Di Tang, Jin Wang. Microstructure Features of the Steel Side in TA2-Q235B Explosive Clad Plates. Journal of University of Science and Technology Beijing, 2012, (06): 671-676.

45. Bao-tong Zhuang, Di Tang, Hai-tao Jiang, Zhi Liu. Microstructure and Mechanical Properties of High Strength Q&P Steel for Automobiles. Journal of University of Science and Technology Beijing, 2012, (04): 390-396.

46. Cheng Li, Qing-wu Cai, Hai-tao Jiang, Qian Meng, Zhe Wang. Influences of Yttrium Element and Solid-Solution Treatment on Microstructure and Properties of AZ31Magnesium Alloy, Journal of University of Science and Technology Beijing, 2012, (04): 417-423.

47. Ji-xiong Liu, Ai-min Zhao, Hai-tao Jiang, Di Tang, Jin Wang. Effect of Post-heat-treatment Interface Cracking of Titanium/steel Explosive Clad Plate by In-situ Observation of Bending. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2012, (07): 88-93.

48. Ji-xiong Liu, Ai-min Zhao, Hai-tao Jiang, Di Tang, Heng-yong Shui. In-situ SEM Observation on Titanium Clad Steel Plates in the Bending Process. Journal of University of Science and Technology Beijing, 2012, (04): 424-429.

49. Bao-tong Zhuang, Hai-tao Jiang, Di Tang, Zhen-li Mi, Zhen Kuai. Study of Retained Austenite in Q&P Steel for Automobile. Advanced Materials Research, 2012, 482-484: 1436-1441.

50. Li-hui Wang, Di Tang, Hai-Tao Jiang, Ji-bin Liu, Yu Chen. Effects of Different Manganese Content on Microstructures and Properties of TWIP Steel. Beihai, China. Advanced Materials Research, 2012, 399 - 401: 254-258

51. Hai-Tao Jiang, Ji-Xiong Liu, Zhen-Li Mi, Ai-Min Zhao, Yan-Jun Bi. Texture Evolution of Commercial Pure Ti during Cold Rolling and Recrystallization Annealing. International Journal of Minerals, Metallurgy and Materials. 2012, 19(6): 530-535.

52. Hai-Tao Jiang, Wei Ding, Di Tang, Wei Huang. Mechanical Property and Microstructural Characterization of C-Mn-Al-Si Hot Dip Galvanizing TRIP Steel. Journal of Iron and Steel Research, International. 2012, 19(8): 29-36.

53. Qiang Meng, Qing-wu Cai, Hai-Tao Jiang,, Shui-ping Hu. {0002} Double Peak Texture of AZ31 Magnesium Alloy during Uniaxial Tension. CHINESE JOURNAL OF RARE METALS, 2011, (02): 159-163.

54. Bao-tong Zhuang, Di Tang, Hai-tao Jiang, Zhen-li Mi. Effect of Manganese on CCT Curve of Q&P Steel for Automobile. MATERIALS SCIENCE & TECHNOLOGY. 2011, (06): 39-42.

55. Bao-tong Zhuang, Di Tang, Hai-tao Jiang, Zhi Liu. Influence of Quenching and Partitioning Process on Mechanical Properties of a 0.3C-1.35Mn-1.30Si Steel. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2011, (11): 34-38.

56. Zi-liu Xiong, Qing-wu Cai, Hai-tao Jiang, Di Tang. Research on Mechanical Stability of Austenite in TRIP Steels. JOURNAL OF METERIALS ENGINEERING, 2011, (03): 11-15.

57. Qiang Meng, Qing-wu Cai, Hai-tao Jiang, Shui-ping Hu. Effect of the Boundary and Textures of Grains on Anisotropy of AZ31 Magnesium Alloy. J. Huazhoug Univ. of Sci. & Tech. (Natureal Science Edition), 2011, (01): 62-65.

58. Hai-tao Jiang, Di Tang, Zhen-li Mi, Bao-tong Zhuang. Effect of Partitioning Parameters on the Retained Austenite in Low-carbon Q&P Steel. MATERIALS SCIENCE & TECHNOLOGY, 2011, (01): 99-103.

59. Wei Huang, Di Tang, Hai-tao Jiang, Wei Ding, Lei-lei Xie. Effect of Hot Galvanizing Processes on the Mechanical Properties of Non-Si and P Added TRIP Steel. Journal of University of Science and Technology Beijing, 2011, (10): 1220-1225.

60. Wei Ding, Di Tang, Hai-tao Jiang, Bao-feng Wang, Zhi-hua Gong. Mechanical Properties of Continuously Annealed Si-Free P-containing TRIP Steel. ACTA METALLURGICA SINICA, 2011, (08): 1022-1025.

61. Qiang Meng, Qing-wu Cai, Hai-tao Jiang, Shui-ping Hu, Zhen Li. Effect of Differential Speed Rolling on Static Recrystallization and Grain Refinement of AZ31 Magnesium Alloy. Journal of University of Science and Technology Beijing, 2011, (01): 47-52.

62. Ding Wei, Tang Di, Jiang Hai-tao, Huang Wei. Influence of Isothermal Bainite Transformation Time On Microstructure and Mechanical Properties of Hot-Dip Galvanized Trip Steel. Journal of Materials Engineering and Performance. 2011, 20(6): 997-1002.

63. Ding Wei, Tang Di, Jiang Hai-tao, Huang Wei. Annealing Processing Parameters and Microstructure Evolution of 780MPa Hot Dip Galvanizing TRIP Steel. Journal of University of Science and Technology Beijing, 2010, (06): 753-758.

64. Ding Wei, Tang Di, Jiang Hai-tao, Tian Zhi-qiang, Yin An-min. Mechanical Property and Retained Austenite of Low-Si TRIP Steel. JOURNAL OF METERIALS ENGINEERING, 2010, (04): 72-75.

65. Hai-tao Jiang, Di Tang, Zhen-li Mi, Yu-lai Chen. Influence of Processing Parameters of Hot Stamping to Mechanical Properties of Martensite Steel and Segregation of Boron. JOURNAL OF METERIALS ENGINEERING, 2010, (02): 69-73.

66. Ding Wei, Tang Di, Jiang Hai-tao, Huang Wei. Influence of Martensite on Mechanical Properties of Hot-dip Galvanized TRIP Steel. ACTA METALLURGICA SINICA, 2010, (05): 595-599.

67. Zhen Li, Qing-wu Cai, Hai-tao Jiang, Qiang Meng. Effects of Differential Speed Ratio on the Microstructure and Texture of AZ31Magnesium Alloy Sheets Processed by Differential Speed Rolling. Journal of University of Science and Technology Beijing, 2010, (08): 1017-1022.

68. Hai-tao Jiang, Di Tang, Zhen-li Mi, Yu-lai Chen. Microstructure, Mechanical Properties and Strengthening Mechanism of Nb Bearing TRIP Steel after Continuous Annealing Process. Journal of University of Science and Technology Beijing, 2010, (02): 201-206.

69. Zhi-qiang Tian, Di Tang, Hai-tao Jiang, Ming Zeng. Refinement Mechanism of Ultrafine-grain Vanadium-containing Dual Phase Steel. Journal of University of Science and Technology Beijing, 2010, (01): 32-38.

70. Zi-liu Xiong, Qing-wu Cai, Hai-tao Jiang, Di Tang, Mei Zhang, Qiang Li. Heredity of Hot Rolled Microstructure in a High Strength TRIP Steel. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2010, (01): 86-90.

71. Cai Zhao, Hai-tao Jiang, Di Tang, Song-shan Zhao, Zhi-song Cheng. Research on Deformation Mechanism and Relationship Between Microstructure and Properties of Quenching and Partitioning Steel. JOURNAL OF METERIALS ENGINEERING, 2009, (02): 19-23.

72. Hai-tao Jiang, Xiao-yong Tang, Tang Di, Qiang Liu. Effect of Heat Treatment on Microstructure and Properties of a Cold-rolled TRIP800 Steel. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2009, (04): 53-56.

73. Miao-quan Li, Ya-lin Lu, Hai-tao Jiang, Wei-chao huang. Modeling and Application of Deformation Behavior for the Semi-solid Forming. Materials Review, 2009, (03): 1-5.

74. Hai-tao Jiang, Cai Zhao, Di Tang, Song-shan Zhao. Experimental Analysis of Si-Mn system Q&P Steel Heat Treatment Process. World Iron & Steel, 2009, (01): 36-39.

75. Di Tang, Zhen-li Mi, Ai-min Zhao, Hai-tao Jiang. History, Present Situation and Development of Cold-rolled Steel Sheet for Automotive in China. Proceedings of 2009 International Symposium on Automobile Steel, 2009:109.

76. Hai-tao Jiang, Di Tang, Wei Ding, Qiang Li. A Tension Observation and Fracture Mechanics of TRIP Steel. Proceedings of 2009 International Symposium on Automobile Steel, 2009:222.

77. Hai Zhang, Hai-tao Jiang, Di Tang. Investigation on Recrystallization Annealing and Formability of 00Cr12Ti Ferritic Stainless Steel. Iron and Steel. 2008, (11): 74-77.

78. Hai-tao Jiang, Zhen-li Mi, Di Tang, Hai-quan Wang, Yong-juan Dai. In-situ Observation of Micro- structure in TWIP Steel During Tensile Deformation. JOURNAL OF METERIALS ENGINEERING. 2008, (01): 38-41.

79. Zi-liu Xiong, Hai-tao Jiang, Qing-wu Cai, Di Tang, Ren-dong Liu. Tension Test and Microstructural Mechanism for Eliminating the Yield Platform of TRIP Steel. Journal of University of Science and Technology Beijing. 2008, (04): 379-382.

80. Hai-tao Jiang, Hui-bin Wu, Di Tang, Qiang Liu. Influence of Isothermal Bainitic Processing On the Mechanical Properties and Microstructure Characterization of TRIP Steel. Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 2008, 15(5): 574-579.

81. Cai Zhao, Di Tang, Hai-tao Jiang, Song-shan Zhao, Hui Li. Process Simulation and Microstructure Analysis of Low Carbon Si-Mn Quenched and Partitioned Steel. Journal of Iron and Steel Research (International), 2008, (04): 82-85.

82. Hai-tao Jiang, Ming-liang Qiao, Yi-xin Huang. Microstructure and Mechanical Properties of X80 HTP Pipeline Steel Produced by Steckel Mill. ENGINEERING SCIENCE, 2008,6(1):78.

83. Hai-tao Jiang, Di Tang, Qiang Liu, Ren-dong Liu, Ling Yan. Investigation of Retained Austenite and Its stabilization in TRIP Steel. Shanghai Metals, 2007, (08): 60-63.

84. Hai-tao Jiang, Di Tang, Zhen-li Mi. Latest Progress in Development and Application of Advanced High Strength Steels for Automobiles. Journal of Iron and Steel Research, 2007, (08): 1-6.

85. Zhen-li Mi, Di Tang, Hai-tao Jiang, Yong-juan Dai, Hai-quan Wang, Shen-sheng Li. Deformed Microstructure Characteristics of Fe-28Mn-3Si-3Al TWIP Steel. Journal of University of Science and Technology Beijing, 2007, (12): 1200-1203.

86. Zhen-li Mi, Di Tang, Hai-tao Jiang, Yong-juan Dai, Hai-quan Wang. Twins Observation during Deformation of Fe-28Mn-3S-i 3Al TWIP Steel. Iron and Steel, 2007, (12): 73-76.

87. Hai-tao Jiang, Zhen-li Mi, Di Tang, Miao-quan Li. Microstructure Evolution of Al-4Cu-Mg Alloy during Semi-Solid Treatment. Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 2007, 14(2): 151-156.

88. Hui-bin Wu, Hai-tao Jiang, Shan-wu Yang, Di Tang, and Xin-lai He. Thermal Stability of Non- equilibriums Microstructure in Micro-alloyed Steeled during Reheating. ACTA Metallurgical Sinica, 2007, 20(5):313.

89. Hai-tao Jiang, Miao-quan Li. Grain Growth of Al-4Cu-Mg Alloy during Isothermal Heat Treatment. Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2006, (01): 67-72.

90. Hao Yu, Yi Sun, Qi-Xiang Chen, Hai-tao Jiang, Li-hong Zhang. Precipitation Behaviors of X70 Acicular Ferrite Pipeline Steel. Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2006, 13(6): 523-527.

91. Hai-tao Jiang, Yong-Lin Kang, Zheng-wei Liang. Structure and Properties of Simulation Rolled X65 Pipeline Steel on Steckel Mill. Iron and Steel, 2006, (04): 51-55.

92. Hai-tao Jiang, Yong-Lin Kang, Zheng-wei Liang. Microstructure and Impact Toughness of High Strength Pipeline Steel. Iron Steel Vanadium Titanium, 2006, (01): 33-37.

93. Hai-tao Jiang, Yong-Lin Kang, Quan-li Wang, Ai-ming Xiong. Bake Hardenability of High Strength Automobile Sheet. Research on Iron & Steel, 2006, (01): 54-57.

94. Hai-tao Jiang, Yong-Lin Kang, Yi-xin Huang, Ming-liang Qiao, Yu-qun Yin. Research and Development of X65 Pipeline Steel Plate Produced by Steckel Mill. Iron and Steel, 2006, (10): 59-63.

95. Hai-tao Jiang, Yong-Lin Kang, Hao Yu, Zheng-wei Liang. Production Technology of High Strength and Toughness Pipeline Steel Produced by Steckel Mill. Journal of Iron and Steel Research, 2006, (03): 1-5.

96. Ya-lin Lu, Hai-tao Jiang, Wei-chao Huang, Miao-quan Li. Compression Deformation of Semi-solid LY11 Alloy. Special Casting & Nonferrous Alloys, 2005, (03): 164-167.

97. Wei-chao Huan, Ya-lin Lu, Hai-tao Jiang, Miao-quan Li. Effect of the Process Parameters on Microstructure of the Semisolid Al-4Cu-Mg Alloy in the Isothermal Compression Process. Rare Metal Materials and Engineering, 2005, (05): 833-836.

98. Ya-lin Lu, Wei-chao Huang, Hai-tao Jiang, Miao-quan Li. Effect of Process Parameters on Mechanical Behavior of Semi-solid Al-4Cu-Mg Alloy. JOURNAL OF METERIALS ENGINEERING, 2005, (05): 11-14.

99. Hai-tao Jiang, Yong-Lin Kang, Hao Yu, Zheng-wei Liang. Development and Application of High Grade Pipeline Steel at Home and Abroad. Pipeline Technique and Equipment, 2005, (05): 24-27.

100. Hai-tao Jiang, Miao-quan Li. Microscopic Observation of Cold-Deformed Al–4Cu–Mg Alloy Samples after Semi-Solid Heat Treatments. Materials Characterization, 2005, 54(4–5): 451-457.

101. Hai-tao Jiang, Yong-Lin Kang, Hao Yu. Research Progress and Development of Bake Hardening Steel Sheet for Automobile. Automobile Technology & Materials, 2005, (03): 1-4.

102. H.T.Jiang and M.Q.Li. A model for grain growth in semi-solid treatment of an Al-4Cu-Mg alloy. Material Science Forum, 2005, 475-479:2571-2574.

103. Wei-chao Huang, Ya-lin Lu, Hai-tao Jiang, Miao-quan Li. Microstructural Evolution of the Semi-solid Al-4Cu-Mg Alloy during Isothermal Compression Process. Special Casting & Nonferrous Alloys, 2004, (06): 8-10.

104. Ya-lin Lu, Wei-chao Huang, Hai-tao Jiang, Miao-quan Li. Deformation Behavior of the Semi-solid LY11Alloy. Foundry, 2004, (12): 997-1000.

105. Hai-tao Jiang, Wei-chao Huang, Ya-lin Lu, Miao-quan Li. Microstructure Evolution of Semi-Solid LY11 Alloy by SIMA. Rare Metal Materials and Engineering, 2004, (08): 869-872.

106. Hai-tao Jiang, Wei-chao Huang, Ya-lin Lu, Miao-quan Li. Influence of Processing Parameters on Microstructures and Properties of the Semi-solid Al-4Cu-Mg Alloy. Special Casting & Nonferrous Alloys, 2004, (03): 13-15.

107. Hai-tao Jiang, Miao-quan Li. Effects of Isothermal Heat Treatment on Microstructural Evolution of Semisolid Al-4Cu-Mg Alloy. Journal of Materials Engineering and Performance, 2004, 13(4):488-492.

108. Hai-tao Jiang, Ya-lin Lu, Wei-chao Huang, Xiao-li Li, Miao-quan Li. Microstructural Evolution and Mechanical Properties of the Semisolid Al–4Cu–Mg Alloy. Materials Characterization, 2003, 51(1): 1-10.

109. Hai-tao Jiang, Miao-quan Li. Study on preparation technique of LY11sem-i solid alloy by SIMA. Forging & Stamping Technology. 2003, (03): 37-39.

110. Hai-tao Jiang, Xiao-li Li, Ai-ming Xiong, and Miao-quan Li. Fabrication and Microstructure Evolution of Semi-Solid LY11 Alloy by SIMA. Journal of Materials Engineering and Performance, 2003, 12(3):249~253.

111. Hai-tao Jiang, Ya-lin Lu, Wei-chao Huang, Miao-quan Li. Fabrication and Microstructure Evolution of Semi-Solid LY11 Alloy by SIMA. Journal of Materials Engineering and Performance, 2003,26(5):192~196.

112. Hai-tao Jiang, Xiao-li Li, Miao-quan Li. The Present Status and Perspectives of Simulation Technique on the Semi-solid Metal Forming. Foundry Technology, 2002, (06): 328-329.

113. Hai-tao Jiang, Miao-quan Li. Manufacturing technology and its application of semi-solid metal materials. Heavy Machinery, 2002, (02): 1-5.

114. Shi-qiang Lu, Hai-tao Jiang, Gao-chao Wang, Zhi-he Liu. A Study on Thermal mechanical Coupled Analysis Technique of Axial symmetry Forging Forming Process. Journal of Nanchang Institute of Aeronautical Technology, 2001, 15(2): 5-10.

115. Hai-tao Jiang, Di Tang, Zhen-li Mi, Xiao-ge Duan, Ai-ming Zhao, Hui-bin Wu, Zhao Ma, Zheng-xu Cai, Qing Kang. The Rolling Method for Ultra-thin Magnesium Alloy Sheet or Foil Using Double-sided Cladding Aluminum Plate. Application number: 2013104520829

116. Hai-tao Jiang, Zhen-li Mi, Di Tang, Yan-xin Wu, Le-le Dai, Xiao-ge Duan, Zhi-chao Li, Ai-ming Zhao. A Kind of Cold-rolled Medium Manganese Steel Sheet with High Strength and Plasticity and Its Processing Method. Application number: 201310073798

117. Jian-Hua Liu, Chuan-ling Zhuang, Hai-tao Jiang, Jun-ru Guo. One Kind of Electroslag Remelting Process of High Strength and High Plasticity TWIP Steel. Application number: 2013104991441

118. Jian-Hua Liu, Chuan-ling Zhuang, Hai-tao Jiang, Ping Zhang. One Kind of Argon Oxygen Furnace Smelting Process of Low-carbon TWIP Steel. Application number: 201310364481.X

119. Ai-ming Zhao, Hai-tao Jiang, Zhen-li Mi, Di Tang, Jia-li Cao, Ji-xiong Liu, Xiao-nan Ding. One Kind of High Manganese Non-magnetic Steel with Niobium and Its Fabrication Method. Application number: 201210222982

120. Hua-qiang Liu, Di Tang, Hai-tao Jiang, Wei Yu, Zhen-li Mi, Shui-ping Hu, Qing-wu Cai. One Kind of Apparatus for Fully-continuous Finishing of Mg Alloy Coil and Its Finishing Process. Application number: 201210254458

121. Hua-qiang Liu, Di Tang, Hai-tao Jiang, Wei Yu, Qing-wu Cai, Zhen-li Mi, Shui-ping Hu. One Kind of Apparatus for Continuous Asymmetrical Rolling of Thin Mg Alloy Sheet and Coil. Patent number: 201220356223

122. Zhen-li Mi, Di Tang, Hai-tao Jiang, Bao-tong Zhuang, Yu-lai Chen, Ai-ming Zhao, Yin-li Chen, Zhi-song Cheng, Mei-fang Chen. One Kind of Hot-rolled C-Si-Mn Steel and Its Fabrication Method. Patent number: 201110154249

123. Hai-tao Jiang, Zhen-li Mi, Di Tang, Yu-lai Chen, Bao-tong Zhuang, Ai-ming Zhao, Yin-li Chen, Zhi-song Cheng. One Kind of Quenching and Partitioning Process of Cold-rolled TRIP Steel. Patent number: 201110154471

124. Zhen-li Mi, Mei-fang Chen, Hai-tao Jiang, Zhi-chao Li, Ai-ming Zhao. One Kind of Method of Distinguishing Bainite from TRIP Steel and Calculating the Proportion of the Three Phases. Patent number: 201110192697

125. Zhen-li Mi, Hai-tao Jing, Di Tang, Hai-tao Jiang, Zhi-chao Li, Yan-xin Wu, Shun-li Yang. One Kind of Annealing Process Enhancing the Strength and Ductility of High Manganese TWIP Steel. Patent number: 201110409675

126. Hai-tao Jiang, Di Tang, Zhen-li Mi, Yu-lai Chen, Zhi-song Cheng, Chen Dong, Zhi-qiang Tian, Cai Zhao. One Kind of C-Mn-Al Q&P Steel with Low Alloy and High Strength and Its Fabrication Method. Patent number: 200910077392

127. Zhen-li Mi, Di Tang, Hai-tao Jiang, Yong-juan Dai, Shen-sheng Li, Jian-chong Lv. One Kind of Process of Producing High Mn and High Al Steel with High Strength and Plasticity. Patent number: 200810239155

128. Zhen-li Mi, Di Tang, Hai-tao Jiang, Yong-juan Dai, Jian-chong Lv. One Kind of Phosphorus-bearing Strengthened TWIP Steel and Its Fabrication Method. Patent number: 200810239893

129. Di Tang, Zhen-li Mi, Hai-tao Jiang, Yong-juan Dai, Jian-chong Lv. One Kind of Nitrogen-bearing Strengthened High Carbon TWIP Steel and Its Fabrication Method. Patent number: 200810239894

130. Zhen-li Mi, Di Tang, Hai-tao Jiang, Yong-juan Dai, Jian-chong Lv. One Kind of Process of Fabricating High Carbon TWIP Steel. Patent number: 200810239895

131. Zhen-li Mi, Di Tang, Hai-tao Jiang, Yong-juan Dai, Hai-quan Wang, Shen-sheng Li. One Kind of Cu and Ni Alloyed TWIP Steel and Its Fabrication Method. Patent number: 200710178352