[1] PENG G, WANG H, ZHANG H, et al. A hypernetwork-based approach to collaborative retrieval and reasoning of engineering design knowledge[J]. Advanced Engineering Informatics, 2019,42.

[2] LI T, LV Z. A Novel Two-Stage Method for Collaboratively Scheduling of Steel Production and Energy in Steelmaking and Continuous Casting Processes: 6th IEEE International Conference on Industrial Engineering and Applications, ICIEA 2019, April 12, 2019 - April 15, 2019[100], Tokyo, Japan: Institute of Electrical and Electronics Engineers Inc., 2019.

[3] LEI M, YONGJUN Z, CHAONAN T, et al. A Photovoltaic MPPT Control Strategy Based on Gradient Optimization and MPP Voltage Law: 31st Chinese Control and Decision Conference, CCDC 2019, June 3, 2019 - June 5, 2019[100], Nanchang, China: Institute of Electrical and Electronics Engineers Inc., 2019.

[4] XIAO X, WANG J, ZHANG Y, et al. A Two-dimensional Convolutional Neural Network Optimization Method for Bearing Fault Diagnosis[J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2019,39(15):4558-4567.

[5] FENG X, WANG X, SUN J, et al. Analysis of tapered work roll shifting technique in 5-stand UCMW tandem cold rolling process[J]. 2019.

[6] HE Y, LIU J, YANG Y, et al. Effect of La Addition on Inclusions, Microstructures, and High-Temperature Mechanical Properties of As-Cast FeCrAl Alloys: 10th International Symposium on High-Temperature Metallurgical Processing held at the TMS Annual Meeting and Exhibition, 2019, March 10, 2019 - March 14, 2019[100], San Antonio, TX, United states: Springer International Publishing, 2019.

[7] AN H, BAO Y P, WANG M, et al. High-efficiency continuous casting of GCr15 bearing steel bloom based on cooperative control technique of complex electromagnetic stirring and soft reduction[J]. Metallurgical Research and Technology, 2019,116(6).

[8] DONG E, YU W, CAI Q, et al. High-temperature deformation behavior of TiNi-Nb hypoeutectic alloy[J]. Materials Science and Engineering A, 2019,764.

[9] AN H, BAO Y, WANG M, et al. Improvement of centre segregation in continuous casting bloom and the resulting carbide homogeneity in bearing steel GCr15[J]. 2019.

[10] LIU X, XU K, ZHOU D. Improvements for the recognition rate of surface defects of aluminum sheets: Light Metals Symposium held at the TMS Annual Meeting and Exhibition, 2019, March 10, 2019 - March 14, 2019[100], San Antonio, TX, United states: Springer International Publishing, 2019.

[11] WANG W, SU W, LIU J, et al. Influence of mould curvature on the metallurgical performances of beam blank continuous casting[J]. 2019.

[12] XUE W, LI Z, XIAO K, et al. Initial microzonal corrosion mechanism of inclusions associated with the precipitated (Ti, Nb)N phase of Sb-containing weathering steel[J]. 2019.

[13] LIU B P, YANG J, WU Y, et al. Investigation of massive ferrite in an interstitial-free steel[J]. Materials Characterization, 2019,157.

[14] PENG G, WANG H, ZHANG H. Knowledge-based intelligent assembly of complex products in a cloud CPS-based system: 23rd IEEE International Conference on Computer Supported Cooperative Work in Design, CSCWD 2019, May 6, 2019 - May 8, 2019[100], Porto, Portugal: Institute of Electrical and Electronics Engineers Inc., 2019.

[15] WANG Y, SHAO Y, CHEN Z, et al. Mesh stiffness calculation of helical gears with profile modification: Institution of Engineering and Technology, 2019.

[16] ZHANG K, ZHANG L, SHAO Y, et al. Relationship between the engaging force of planetary gear train and the position-correlated modal properties: Institution of Engineering and Technology, 2019.

[17] XU D, LIU Y, WANG X, et al. Research and application on slab camber control model in hot rolling[J]. 2019.

[18] CHANGHAO M, FEI W, JIAN S. Research on error modeling and compensation method of hot rolling shape setting model based on cluster and neural network: 4th International Conference on Automation, Control and Robotics Engineering, CACRE 2019, July 19, 2019 - July 21, 2019[100], Shenzhen, China: Association for Computing Machinery, 2019.

[19] DENG Z, LIU J, HE Y, et al. Study on phase transition and precipitation behavior of fecral stainless steel during equilibrium solidification: AISTech 2019 Iron and Steel Technology Conference and Exposition, May 6, 2019 - May 9, 2019[100], Pittsburgh, PA, United states: Association for Iron and Steel Technology, AISTECH, 2019.

[20] HE H, LIU Y, YANG Q, et al. Symmetry variable taper work roll technology for silicon steel profile control in hot strip mills[J]. 2019.

[21] WAN Q, PENG G, ZHAO J, et al. A Multi-objective Collaborative Optimization Algorithm Based on Cycle Subsystem Model with Features for Product Family Design: 2018 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018, October 7, 2018 - October 10, 2018[100], Miyazaki, Japan: Institute of Electrical and Electronics Engineers Inc., 2018.

[22] PENG G, WANG H, ZHANG H. Collaborative Reasoning of Design Knowledge with a Hypemetwork Model: 22nd IEEE International Conference on Computer Supported Cooperative Work in Design, CSCWD 2018, May 9, 2018 - May 11, 2018[100], Nanjing, China: Institute of Electrical and Electronics Engineers Inc., 2018.

[23] DONG R, LV K, GUO H, et al. Effect of annealing processes on microstructures and mechanical properties of medium Mn steel: Chinese Materials Conference, 2018, July 12, 2018 - July 16, 2018[100], Fujian, China: Trans Tech Publications Ltd, 2018.

[24] YU Z C, MI Z L, CAI Q W, et al. Effect of final rapid cooling temperature on ultra-fine carbides of Ti-Mo ferrite matrix microalloyed steel: 2nd International Symposium on Advanced Material Research, ISAMR 2018, March 16, 2018 - March 18, 2018[100], Jeju Island, Korea, Republic of: Trans Tech Publications Ltd, 2018.

[25] ZHANG Z, YU W, DONG E, et al. Effect of preparation process on surface quality and microstructure of titanium sheet: Chinese Materials Conference, 2018, July 12, 2018 - July 16, 2018[100], Fujian, China: Trans Tech Publications Ltd, 2018.

[26] DONG E, YU W, CAI Q, et al. Effects of hot-rolled process and heat treatment on microstructure and mechanical properties of Ti-6Al-4V ELI alloy: Chinese Materials Conference, 2018, July 12, 2018 - July 16, 2018[100], Fujian, China: Trans Tech Publications Ltd, 2018.

[27] XU Z J, CHEN Y L, SU L, et al. Effects of solid solution and aging treatment on texture evolution and properties of cu-ni-si alloy: Chinese Materials Conference, CMC 2017, July 6, 2018 - July 12, 2018[100], Yinchuan City, Ningxia, China: Trans Tech Publications Ltd, 2018.

[28] AN H, BAO Y, WANG M, et al. Electromagnetic torque detecting for optimization of in-mould electromagnetic stirring in the billet and bloom continuous casting[J]. 2018.

[29] HE H, WANG X, YANG Q. High-precision section control technology for high-strength yoke steel strip: Chinese Materials Conference, 2018, July 12, 2018 - July 16, 2018[100], Fujian, China: Trans Tech Publications Ltd, 2018.

[30] WANG S, LI W, WANG X, et al. Impact tensile cracking behavior of oxide scale in Q235 strip iron: 2nd International Conference on Material Engineering and Advanced Manufacturing Technology, MEAMT 2018, May 25, 2018 - May 27, 2018[100], Beijing, China: EDP Sciences, 2018.

[31] ZHANG D, WU H B, NIU G, et al. Influence of warm deformation on strain-induced martensite behavior of 316l stainless steel: Chinese Materials Conference, CMC 2017, July 6, 2018 - July 12, 2018[100], Yinchuan City, Ningxia, China: Trans Tech Publications Ltd, 2018.

[32] ZHANG Y J, WANG X C, YANG Q, et al. Nondestructive evaluation method of average grain size in twip steel by laser ultrasonic: Chinese Materials Conference, CMC 2017, July 6, 2018 - July 12, 2018[100], Yinchuan City, Ningxia, China: Trans Tech Publications Ltd, 2018.

[33] SONG G, WANG X, YANG Q, et al. Optimization technology of roll contours during skin-pass rolling process of hot-rolled strip: Chinese Materials Conference, 2018, July 12, 2018 - July 16, 2018[100], Fujian, China: Trans Tech Publications Ltd, 2018.

[34] ZHAO J, YANG Q, WANG X. Physical modeling of flow stress during the hot deformation of NB steels: Chinese Materials Conference, 2018, July 12, 2018 - July 16, 2018[100], Fujian, China: Trans Tech Publications Ltd, 2018.

[35] HE H, WANG X, YANG Q, et al. Smart-shifting strategy of work rolls for downstream stands in hot rolling[J]. 2018.

[36] HE Y, LIU J, QIU S, et al. Thermodynamic analysis of inclusion characteristics in as-cast FeCrAl-(La) alloys[J]. 2018.

[37] LU C Z, LI J Y, YANG D Y, et al. Effect of cold working and aging treatment on the mechanical properties of Co-Ni alloy: 17th IUMRS International Conference in Asia, IUMRS-ICA 2016, October 20, 2016 - October 24, 2016[100], Qingdao, China: Trans Tech Publications Ltd, 2017.

[38] ZHOU P, GUO H, ZHAO A M, et al. Effect of pre-existing martensite on bainitic transformation in low-temperature bainite steel: 17th IUMRS International Conference in Asia, IUMRS-ICA 2016, October 20, 2016 - October 24, 2016[100], Qingdao, China: Trans Tech Publications Ltd, 2017.

[39] LV Z, LI T. Extended resource task network for collaborative scheduling of material and energy flows in iron and steel enterprises: 4th International Conference on Industrial Engineering and Applications, ICIEA 2017, April 21, 2017 - April 23, 2017[100], Nagoya, Japan: Institute of Electrical and Electronics Engineers Inc., 2017.

[40] Y. J, S. S, J. L, et al. Extracting Chromium from Stainless Steel Slags by NaOH-Added Pellet Roasting Followed by Water Leaching[J]. Steel Research International, 2017,88(9).

[41] ZHANG F, ZONG S, LING Z. Fault diagnosis using kernel principal component analysis for hot strip mill[J]. Journal of Engineering, 2017,2017(9):527-535.

[42] DONG F, YANG Q, WANG X, et al. Grain size distribution measurement of Ti-6Al-4V plate using laser-ultrasonics: 174th Meeting of the Acoustical Society of America, December 4, 2017 - December 8, 2017[100], New Orleans, LA, United states: Acoustical Society of America, 2017.

[43] LI H, MI Z, ZHANG H, et al. Influence of Partition Time on Mechanical Properties and Microstructure of QP Steel[J]. Cailiao Daobao/Materials Review, 2017,31(2):83-86.

[44] WANG P L, JIANG H T, ZHANG R J, et al. Study of hot deformation behavior of 6082 aluminum alloy: 15th International Conference on Aluminium Alloys, ICAA 2016, June 12, 2016 - June 16, 2016[100], Chongqing, China: Trans Tech Publications Ltd, 2017.

[45] WEI H, Y. L. C, L. S, et al. Study on Texture Evolution and Deformation Mechanism of the Cu-Ni-Si Alloy during Cold-rolling Treatment: International Conference on the Technology of Plasticity, ICTP 2017, September 17, 2017 - September 22, 2017[100], Hucisko, United kingdom: Elsevier Ltd, 2017.

[46] WANG H, CHEN Y. The effect of finish rolling temperature on the microstructure and properties of non-quenched and tempered Bainite steel: International Conference on the Technology of Plasticity, ICTP 2017, September 17, 2017 - September 22, 2017[100], Hucisko, United kingdom: Elsevier Ltd, 2017.

[47] JIANG H, ZHANG Y, KANG Q, et al. The influence of Ca and Gd microalloying on microstructure and mechanical property of hot-rolled Mg-3Al alloy: International Conference on the Technology of Plasticity, ICTP 2017, September 17, 2017 - September 22, 2017[100], Hucisko, United kingdom: Elsevier Ltd, 2017.

[48] SHAO J, YAO C, CHEN C, et al. A rapid online calculation method of three-dimensional plastic deformation in strip rolling[J]. International Journal of u- and e- Service, Science and Technology, 2016,9(2):151-162.

[49] WU Z, LI D, XUE Y, et al. Active disturbance rejection control for fluidized bed combustor: 16th International Conference on Control, Automation and Systems, ICCAS 2016, October 16, 2016 - October 19, 2016[100], Gyeongju, Korea, Republic of: IEEE Computer Society, 2016.

[50] WEI W, ZHANG R, WANG J, et al. Active disturbance rejection control for nanopositioning systems with piezoelectric actuators: 16th International Conference on Control, Automation and Systems, ICCAS 2016, October 16, 2016 - October 19, 2016[100], Gyeongju, Korea, Republic of: IEEE Computer Society, 2016.

[51] ZHANG F, WANG B. An online algorithm for roll eccentricity compensation[J]. International Journal of u- and e- Service, Science and Technology, 2016,9(9):155-164.

[52] ZHANG F, ZHANG Y, CHEN H. Automatic gauge control of plate rolling mill[J]. International Journal of Control and Automation, 2016,9(2):143-156.

[53] SUN J, NIU C, YIN Y, et al. Constitutive model of TRIP600 based on rheological theory: Chinese Materials Congress on Methods of Design and Characterization of Materials, Research and Development of Technological Processes, 2015, July 10, 2015 - July 14, 2015[100], Guiyang, China: Trans Tech Publications Ltd, 2016.

[54] SUN W, SHAO J, HE A. Design and shape control ability simulation of new generation varying contact length backup roll in hot rolling[J]. International Journal of Multimedia and Ubiquitous Engineering, 2016,11(4):381-390.

[55] ZHANG F, YU W, LIU T. Development of Intermediate Cooling Technology and Its Control for Two-Stand Plate Rolling[J]. Journal of Control Science and Engineering, 2016,2016.

[56] DAI Y, LI H, FENG J, et al. Effect of annealing time and cooling methods on the microstructure and mechanical properties of Fe-28Mn-2.8Si-2.2Al-TWIP steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38:238-242.

[57] DENG J, LIN L. Experimental study on the effect of operating parameters on the mass transfer ability of Hangang 250 t converter[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38:213-218.

[58] CAO J, WANG T, LI H, et al. High-temperature constitutive relationship of non-oriented electrical steel based on modified arrhenius model[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2016,52(4):90-96.

[59] ZHANG F, ZONG S, LI X, et al. Hydraulic gap control of rolling mill based on self-tuning fuzzy PID: IOS Press, 2016.

[60] KOU M, WANG L, XU J, et al. Low CO2emission by improving CO utilization ratio in Chinas blast furnaces[M]//Springer International Publishing, 2016:199-212.

[61] XIAO X, ZHANG Y, WANG J, et al. Model predictive control based on the system-level power balance model for dual-PWM converters[J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2016,36(21):5909-5917.

[62] WANG L, XU K, ZHOU P. Online detection technique of 3D defects for steel strips based on photometric stereo: 8th International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2016, March 11, 2016 - March 12, 2016[100], Macau, China: Institute of Electrical and Electronics Engineers Inc., 2016.

[63] ZHANG F, ZHAO Y, SHAO J. Rolling force prediction in heavy plate rolling based on uniform differential neural network[J]. Journal of Control Science and Engineering, 2016,2016.

[64] ZHOU P, XU K, WANG D. Rail Profile Measurement Based on Line-structured Light Vision[J]. IEEE Access, 2018,6:16423-16431.

[65] LIN H, JIANG H, WANG Y, et al. 6016-T4IFMicrostructures and Mechanical Properties of Joints of 6016-T4 Aluminum Alloy/Galvanized IF Steel by Friction Stir Welding[J]. Cailiao Daobao/Materials Reports, 2019,33(5):1443-1448.

[66] WANG J, MI Z, LI H, et al. 6082Isothermal Forging Process and Strengthening Mechanism of 6082 Aluminum Alloy through Processing Map[J]. Xiyou Jinshu/Chinese Journal of Rare Metals, 2019,43(2):113-121.

[67] LIU S, LI P. A novel chattering-free pi sliding mode control for a class of nonlinear underactuated systems[J]. International Journal of Modelling, Identification and Control, 2019,32(1):54-59.

[68] LI H, WANG J, YAN Z, et al. Al-Mg-SiThrough-Thickness Texture Gradient and Microstructure of Rolling Al-Mg-Si Alloy[J]. Xiyou Jinshu/Chinese Journal of Rare Metals, 2019,43(3):265-273.

[69] FENG X, WANG X, YANG Q, et al. Analysis of Edge Drop Control Performance of Work Roll Contour on Six-high Cold Rolling Mill[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019,55(12):83-90.

[70] CAO J, JIANG J, QIU L, et al. High precision integrated profile and flatness control for new-generation high-tech wide strip cold rolling mills[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2019,50(7):1584-1591.

[71] WANG H, GUO L, YANG Q, et al. Multi-mode control of strip-finishing-temperature in hot-strip mills[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2019,41(7):940-946.

[72] ZHANG G, JIANG H, WU B, et al. TA1Effect of annealing temperature on texture and anisotropy of mechanical properties of pure titanium(TA1) sheet[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2019,50(4):806-813.

[73] XIAO X, WANG J, ZHANG Y, et al. An Optimized Master-Slave Model Predictive Direct Torque Control Scheme for the Dual Motor[J]. Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, 2018,33(24):5720-5730.

[74] ZHANG Y, WANG X, YANG Q, et al. Characterization of mean grain size of interstitial-free steel based on laser ultrasonic[J]. Journal of Materials Science, 2018,53(11):8510-8522.

[75] WANG S, YANG Q, WANG X, et al. Damage behavior of oxide scale at different blasting impact velocities[J]. Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2018,39(4):766-771.

[76] XIAO C, CUI H. Effect of Al content on inclusions in the automobile high strength steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018,40:26-30.

[77] ZHANG C, GUO H, WANG J, et al. Effect of austempering temperature on the microstructure and wear resistance of ultrafine bainitic steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018,40(12):1502-1509.

[78] QIU Z, HE A, SHAO J, et al. Effect of cooling process on reducing residual stress of hot rolled high strength strip[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2018,49(6):1373-1380.

[79] ZHANG K, CHEN Y, SUN Y, et al. Effect of H2O(g) on Decarburization of 55SiCr Spring Steel During the Heating Process[J]. Jinshu Xuebao/Acta Metallurgica Sinica, 2018,54(10):1350-1358.

[80] XU L, WU H, MOU D. Effect of Quenching in Dual-phase Region on Microstructure and Mechanical Properties of 7Ni Steel[J]. Cailiao Gongcheng/Journal of Materials Engineering, 2018,46(8):113-119.

[81] ZHANG K, LIU J, CUI H, et al. Effect of SEN on fluid flow and surface fluctuation in a continuous casting slab mold[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018,40(6):697-702.

[82] ZHANG K, JIANG H, MENG Q, et al. Effect of the welding speed on the microstructure and the mechanical properties of robotic friction stir welded AA7B04 aluminum alloy[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018,40(12):1525-1532.

[83] XU D, DAI Z, LIU Y, et al. Influence of crossed roller on generating camber in hot rough rolling[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018,40(8):954-960.

[84] ZHANG J, LIU J, YAN B, et al. Nonmetallic inclusion removal of Si-Mn deoxidized steel by nitrogen absorption and release method[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018,40(8):937-944.

[85] LI H, CHEN J, DUAN X, et al. QPTRIPStability and TRIP Effect of Retained Austenite of Medium Manganese QP Steel[J]. Cailiao Daobao/Materials Review, 2018,32(2):611-615.

[86] LIANG B, HE F, YANG D, et al. Sensitivity analysis on influencing factor of strip crown in hot rolling[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2018,49(2):353-359.

[87] LIU X, CAO J, CHAI X, et al. Springback prediction of DP980 steel considering nonlinear elastic modulus in cold roll forming[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2018,50(7):137-143.

[88] XU D, YANG Q, WANG X, et al. Vision-based camber on-line measurement system in hot rough rolling[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2018,49(7):1657-1666.

[89] CAO J, SONG H, LIU X, et al. Analysis on Fatigue Life of High Speed EMU Non-Powered Axle Based on ANSYS/FE-SAFE[J]. Zhongguo Tiedao Kexue/China Railway Science, 2017,38(1):111-116.

[90] LIU J, LIU J, WU B, et al. Comparison on the solid-state desilication kinetics of silicon manganese powder by microwave heating and conventional heating[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(2):208-214.

[91] XU M, MI Z, LI H, et al. Constitutive Model Based on Dislocation Density Theory for Hot Deformation Behavior of Ultra-high Strength Dual Phase Steel DP1000[J]. Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2017,31(8):576-584.

[92] PANG Q, TANG D, ZHAO Z, et al. Effects of coiling temperature on microstructure and mechanical properties of high Ti microalloyed ultra-high strength steel[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2017,48(4):910-916.

[93] HE J, XU K, REN W. EMAT Design of Self-excitation with Coils and Its Characteristics Study[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2017,53(16):134-140.

[94] WANG L, XU K, ZHOU P, et al. Fast 3D surface reconstruction algorithm of photometric stereo using multi-scale wavelet transform[J]. Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, 2017,29(1):124-129.

[95] SU L, ZHANG C, WANG Z, et al. Finite Element Simulation of Electromagnetic Induction Heating in Hot Metal Gas Forming[J]. Cailiao Daobao/Materials Review, 2017,31(12):182-186.

[96] CAO J, WANG L, LIU J, et al. Finite element simulation of roll forming process based on over-bend defect control of shaped tube[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2017,48(9):2345-2351.

[97] YIN A, YANG Q, HE F, et al. Grain Size Measurement in Low Carbon Steel Sheets by Laser Ultrasonics[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2017,53(2):11-19.

[98] YU W, WANG B, HE J, et al. Hot-rolled Process of Multilayered Composite Metal Plate[J]. Cailiao Gongcheng/Journal of Materials Engineering, 2017,45(2):32-38.

[99] LIU H, LIU J, SHEN S, et al. Influence of Al content on the characteristics of non-metallic inclusions and precipitation behaviors of AlN inclusions in TWIP steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(7):1008-1019.

[100] XU D, YANG Q, WANG X, et al. Influence of lubrication film thickness on transfer of surface topography at cold rolling interface[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2017,49(1):160-165.

[101] LIU H, LIU J, DING H, et al. Influence of Ti and V on the hot ductility of high manganese austenitic steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(4):520-528.

[102] JIANG H, WU B, ZHANG Y, et al. Interfacial microstructure and deformation mechanism of Ti-steel clad plate under high strain rate[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(7):1070-1076.

[103] YANG Y, MI Z, JIANG H, et al. Mechanism of precipitation strengthing and twinning strengthing in annealing process of Fe-24Mn-3Si-3Al TWIP steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(6):854-858.

[104] ZHOU P, CHEN J, M. L, et al. Microwave absorption properties of SiC@SiO2@Fe3O4hybrids in the 218 GHz range[J]. International Journal of Minerals, Metallurgy and Materials, 2017,24(7):804-813.

[105] DONG X, HE A, SUN W, et al. On-line temperature setup model of reheating furnace based on entropy weight-topsis method[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2017,49(7):119-124.

[106] DENG Z, LIU J, HE Y, et al. Phase transformations and precipitation behavior in FeCrAl stainless steel during equilibrium solidification[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(5):710-720.

[107] LI Z, DANG N, JIANG H, et al. Precipitation and Evolution Behavior of Second Phase Particles in Grain-oriented Silicon Steel with Cu[J]. Cailiao Gongcheng/Journal of Materials Engineering, 2017,45(12):10-16.

[108] CHEN S, HE A, XU Z, et al. Real-time Rolls Integrated Crown Prediction and Application within a Rolling Unit[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2017,53(2):61-66.

[109] ZHENG J, HE A, LIU C, et al. Shape-control characteristics of six-high mill with roll offset[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(8):1188-1197.

[110] CHEN Y, YANG D, LI J, et al. Strengthening mechanisms of cold worked MP35N alloy during aging treatment[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2017,49(5):148-153.

[111] WANG H, YANG Q, WANG X. Study and application of the slab camber control model in rough rolling[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2017,39(2):294-300.

[112] LIU J, LIU J, WU B, et al. Study on Carbothermal Reduction Process of Manganese Ore in Microwave Field[J]. Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 2017,44(12):89-96.

[113] LI D, CUI H. A method for characterizing the flow fluid in a multi-strand tundish[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(1):41-46.

[114] LIU Y, WANG X, YANG Q, et al. Analysis of shape control performance for intermediate roll shifting of universal crown mill[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2016,52(4):82-89.

[115] TIAN S, XU K, GUO H. Application of local binary patterns to surface defect recognition of continuous casting slabs[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(12):1728-1733.

[116] ZHANG Y, LIU J, SU X, et al. Cleanliness study of SWRH82B hard wire steel produced by BOF-LF-CC processes[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38:160-168.

[117] WEI F, LIU J, JI Y, et al. Desulfurization and denitration of sintering flue gas by blast furnace process[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(8):1082-1090.

[118] WU W, MI Z, SU L, et al. Effect of phase transformation on temperature and buckling of continuous annealing strip in two-phase region[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2016,47(6):1835-1842.

[119] PANG Q, TANG D, ZHAO Z, et al. Effect of precipitation phase on microstructure and properties of Nb-V-Ti micro-alloyed steel[J]. Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2016,44(2):133-139.

[120] LI M, HU S. Effect of TMCP on the microstructure and mechanical properties of Si-Mn series bainitic steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(8):1115-1122.

[121] CONG J, TANG D, WU H, et al. Effects of Mn on the microstructure morphology and phase transformation of medium manganese wear resistant steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(1):64-70.

[122] CAO J, TANG H, YANG G, et al. Finite element analysis of edge wave for non-oriented electrical strip with high temperature phase transition[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2016,48(1):146-151.

[123] JIANG C, YUE F, XIN C. Inclusions control of 55SiCr cantilever spring steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38:96-100.

[124] LIN Z, CHEN J, TANG D, et al. Investigation into deformation mechanism of medium manganese QP steel based on stacking fault energy[J]. Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2016,44(2):140-146.

[125] LI S, LIU J, LIU H, et al. Microsegregation in low carbon Fe-Mn-Si-Al TWIP steel[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(7):937-944.

[126] SUN Q, LI Z, MI Z, et al. Microstructure and texture evolution in primary recrystallization of CGO silicon steel[J]. Cailiao Gongcheng/Journal of Materials Engineering, 2016,44(9):38-43.

[127] LIU J, LI K, SHEN S, et al. Numerical analysis of bubble growth in a molten steel/(N2, H2) supersaturation system[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(5):630-636.

[128] DANG N, LI Z, TANG D, et al. Origination and abnormal growth behavior of Goss grains during high temperature annealing process of 0.20mm CGO silicon steel[J]. Cailiao Gongcheng/Journal of Materials Engineering, 2016,44(5):1-7.

[129] YU W, WANG Y. Relationship between cooling parameters and warping of hot rolled strips[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(12):1734-1740.

[130] HE A, LIU D, LIU C. Research on roller straightening mechanical behavior of plastic hardening material[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2016,52(18):85-91.

[131] YU W, WANG Y, LI M, et al. Strategy of discrete edge masking in the laminar cooling process of hot rolling strip[J]. Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2016,48(11):147-154.

[132] XU K, WANG L, WANG J. Surface defect recognition of hot-rolled steel plates based on Tetrolet transform[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2016,52(4):13-19.

[133] ZHI C, ZHAO A, HE J, et al. Thermodynamic analysis and strength-toughness research of nanobainite[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(5):691-698.

[134] PANG Q, TANG D, ZHAO Z, et al. Thermodynamic analysis on precipitated phases in low activation steel[J]. Cailiao Gongcheng/Journal of Materials Engineering, 2016,44(7):37-42.

[135] T. Z. C, Y. J. Z, X. X, et al. Virtual flux vector reconstruction of a PWM rectifier[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(2):283-290.

[136] WU H, ZHANG L, XU Y, et al. Water model study on critical slag entrapment behavior based on PIV technology[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2016,38(5):637-643.

[137] LI T, LV Z M. A Novel Two-Stage Method for Collaboratively Scheduling of Steel Production and Energy in Steelmaking and Continuous Casting Processes[M]//NEW YORK: IEEE, 2019:54-58.

[138] FENG X, WANG X, YANG Q, et al. Analysis of rate dependency on roll force calculation during hot strip rolling based on Karman equation[J]. ADVANCES IN MECHANICAL ENGINEERING, 2019,11(16878140188249311).

[139] LI Y, CAO J, QIU L, et al. Effect of strip edge temperature drop of electrical steel on profile and flatness during hot rolling process[J]. ADVANCES IN MECHANICAL ENGINEERING, 2019,11(16878140198404714).

[140] XUE J, ZHAO Z, BIN C, et al. Effects of rolling and coiling temperature on the microstructure and mechanical properties of hot-rolled high strength complex phase steel[J]. MATERIALS RESEARCH EXPRESS, 2019,6(0965c89).

[141] JIAO K, YU X, YUAN Z, et al. Enhanced filtration performance of Al2O3-SiC porous ceramic composite tube depending on microstructure and surface properties[J]. DESALINATION AND WATER TREATMENT, 2019,150:99-104.

[142] CUI H, ZHANG K, WANG Z, et al. Formation of Surface Depression during Continuous Casting of High-Al TRIP Steel[J]. METALS, 2019,9(2042).

[143] GAO Z, LI J, FENG Z, et al. Influence of hot rolling on the microstructure of lean duplex stainless steel 2101[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019,26(10):1266-1273.

[144] ZHANG K, LIU J, CUI H. Investigation on the Slag-Steel Reaction of Mold Fluxes Used for Casting Al-TRIP Steel[J]. METALS, 2019,9(3984).

[145] YU W, YIMIN S, ZAIGANG C, et al. Mesh stiffness calculation of helical gears with profile modification[J]. The Journal of Engineering, 2019,2019(13):225-230.

[146] ZHANG K, CUI H, WANG R, et al. Mixing Phenomenon and Flow Field in Ladle of RH Process[J]. METALS, 2019,9(8868).

[147] LIU C, ZHANG L, LIAO Y, et al. Multiple Sensors Based Prognostics With Prediction Interval Optimization via Echo State Gaussian Process[J]. IEEE ACCESS, 2019,7:112397-112409.

[148] GAO Z, CAI Q, XIE B, et al. Prediction of High-temperature Deformation Behavior of Low-carbon Bainitic Nb-Ti Micro-alloyed Steel Based on an Improved Strain-Stress Relation[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019,72(10):2793-2802.

[149] KEMING Z, ZHANG L, YIMIN S, et al. Relationship between the engaging force of planetary gear train and the position-correlated modal properties[J]. The Journal of Engineering, 2019,2019(13):284-292.

[150] WANG F, LIU D, LIU W, et al. Reoxidation of Al-Killed Steel by Cr2O3 from Tundish Cover Flux[J]. METALS, 2019,9(5545).

[151] LIU F, ZHANG Y, YILDIRIM T, et al. Signal denoising optimization based on a Hilbert-Huang transform-triple adaptable wavelet packet transform algorithm (vol 124, 54002, 2018)[J]. EPL, 2019,125(299012).

[152] ZHUANG C, LIU J, LI C, et al. Study on high temperature solidification behavior and crack sensitivity of Fe-Mn-C-Al TWIP steel[J]. SCIENTIFIC REPORTS, 2019,9(15962).

[153] WAN Q H, PENG G Z, ZHAO J X, et al. A Multi-objective Collaborative Optimization Algorithm Based on Cycle Subsystem Model with Features for Product Family Design[M]//IEEE International Conference on Systems Man and Cybernetics Conference

Proceedings. NEW YORK: IEEE, 2018:3614-3619.

[154] CHEN B, LIANG J, KANG T, et al. A Study of the Optimum Quenching Temperature of Steels with Various Hot Rolling Microstructures after Cold Rolling, Quenching and Partitioning Treatment[J]. METALS, 2018,8(5798).

[155] XU L, WU H, XIE B. An improved constitutive model for high-temperature flow behaviour of the Fe-Mn-Al duplex steel[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2018,34(2):229-241.

[156] LI H, WANG J, JIANG H, et al. Characterizations of precipitation behavior of Al-Mg-Si alloys under different heat treatments[J]. CHINA FOUNDRY, 2018,15(2):89-96.

[157] ZHOU P, QIAN Q, LI M. Characterizing Non-Metallic Inclusions in Steel by Ultrasonic Spectrum[J]. ACTA ACUSTICA UNITED WITH ACUSTICA, 2018,104(1):39-47.

[158] PENG G Z, WANG H W, ZHANG H M. Collaborative Reasoning of Design Knowledge with a Hypernetwork Model[M]//Shen W, Luo J, Barthes J P, et al. International Conference on Computer Supported Cooperative Work in

Design. NEW YORK: IEEE, 2018:719-724.

[186] LI H, LV Z, JIANG H. Transformation of ferrite/carbide into austenite during continuous heating of a 100Cr6 bearing steel[J]. MATERIALS TESTING, 2017,59(11-12):1009-1013.

[187] XIE B, CAI Q, WEI Y, et al. A New Constitutive Model for the High-Temperature Flow Behavior of 95CrMo Steel[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016,25(12):5127-5137.

[188] HE F, XU J. A novel process monitoring and fault detection approach based on statistics locality preserving projections[J]. JOURNAL OF PROCESS CONTROL, 2016,37:46-57.

[189] WU Z L, LI D H, XUE Y L, et al. Active Disturbance Rejection Control for Fluidized Bed Combustor[M]//International Conference on Control Automation and Systems. NEW YORK: IEEE, 2016:1286-1291.

[190] WEI W, ZHANG R, WANG J, et al. Active Disturbance Rejection Control for Nanopositioning Systems with Piezoelectric Actuators[M]//International Conference on Control Automation and Systems. NEW YORK: IEEE, 2016:1282-1285.

[191] ZHANG F, ZONG S, LI X, et al. Hydraulic gap control of rolling mill based on self-tuning fuzzy PID[J]. JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 2016,31(6SI):2985-2997.

[192] XIA W, LI L, WEI Y, et al. Impact toughness of a gradient hardened layer of Cr5Mo1V steel treated by laser shock peening[J]. ACTA MECHANICA SINICA, 2016,32(2):301-308.

[193] LI G, YU W, CAI Q. Investigation of reduction pretreatment process for continuous casting[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016,227:41-48.

[194] SUN W Q, GUAN J L, SHAO J, et al. MODELLING THE DYNAMICS AND SECONDARY DEFORMATION BEHAVIOUR OF THE STRIP WITH LOCAL WAVES IN COILING PROCESS[J]. INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2016,15(4):754-765.

[195] TING L, CASTRO P M, LV Z. Models and relaxations for the wastewater treatment design problem[J]. CHEMICAL ENGINEERING RESEARCH & DESIGN, 2016,106:191-204.

[196] WANG L, XU K, ZHOU P. Online detection technique of 3D defects for steel strips based on photometric stereo[M]//International Conference on Measuring Technology and Mechatronics

Automation. NEW YORK: IEEE, 2016:428-432.

[197] YIN Y, SUN J, TENG S, et al. Oxidation Behavior of High-Speed Steel Used for Hot Rolls[J]. OXIDATION OF METALS, 2016,86(1-2):45-57.

[198] SUN W Q, LI B, SHAO J, et al. RESEARCH ON CROWN & FLATNESS ALLOCATION STRATEGY OF HOT ROLLING MILLS[J]. INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2016,15(2):327-340.

[199] SUN T, YUE F, WU H, et al. Solidification Structure of Continuous Casting Large Round Billets under Mold Electromagnetic Stirring[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016,23(4):329-337.

[200] LIU P, JIANG H, CAI Z, et al. The effect of Y, Ce and Gd on texture, recrystallization and mechanical property of Mg-Zn alloys[J]. JOURNAL OF MAGNESIUM AND ALLOYS, 2016,4(3):188-196.

[201] AN H, BAO Y, WANG M, et al. Improvement of centre segregation in continuous casting bloom and the resulting carbide homogeneity in bearing steel GCr15[J]. IRONMAKING & STEELMAKING.

[202] WANG W, SU W, LIU J, et al. Influence of mould curvature on the metallurgical performances of beam blank continuous casting[J]. IRONMAKING & STEELMAKING.

[203] AN H, BAO Y, WANG M, et al. Numerical and experimental investigation of solidification structure evolution and reduction of centre segregation in continuously cast GCr15 bloom[J]. IRONMAKING & STEELMAKING.

[204] LI H, SHAO J, HE A, et al. Numerical simulation and effects of steel strip transverse bending during uncoiling in temper mill[J]. IRONMAKING & STEELMAKING.

[205] XU D, LIU Y, WANG X, et al. Research and application on slab camber control model in hot rolling[J]. IRONMAKING & STEELMAKING.

[206] HE H, LIU Y, YANG Q, et al. Symmetry variable taper work roll technology for silicon steel profile control in hot strip mills[J]. IRONMAKING & STEELMAKING:1-9.

[207] PENG K, JIAO R, DONG J, et al. A deep belief network based health indicator construction and remaining useful life prediction using improved particle filter[J]. NEUROCOMPUTING, 2019,361:19-28.

[208] WU Y, PENG G, WANG H, et al. A Heuristic Algorithm for Optimal Service Composition in Complex Manufacturing Networks[J]. COMPLEXITY, 2019(7819523).

[209] WANG L, YE W, SHAO Y, et al. A new adaptive evolutionary digital filter based on alternately evolutionary rules for fault detection of gear tooth spalling[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019,118:645-657.

[210] ZHANG C, PENG K, DONG J. A novel plant-wide process monitoring framework based on distributed Gap-SVDD with adaptive radius[J]. NEUROCOMPUTING, 2019,350:1-12.

[211] ZHANG C, PENG K, DONG J. A P-t-SNE and MMEMPM based quality-related process monitoring method for a variety of hot rolling processes[J]. CONTROL ENGINEERING PRACTICE, 2019,89:1-11.

[212] YAO C, HE A, SHAO J, et al. A real-time quasi-3D metal flow model for hot strip rolling[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019,159:91-102.

[213] WU Y, PENG G, WANG H, et al. A Two-Stage Fault Tolerance Method for Large-Scale Manufacturing Network[J]. IEEE ACCESS, 2019,7:81574-81592.

[214] GAO Z, LI J, WANG Y. Analysis of the Deep Drawing Behavior of 2507 Super Duplex Stainless Steel Based on Texture and Microstructure Evolutions[J]. ISIJ INTERNATIONAL, 2019,59(3):531-540.

[215] LIU C, HE A R, QIANG Y, et al. Constitutive Model and Micro Hardening and Softening Mechanism for Nonoriented Electrical Steel[J]. PHYSICS OF METALS AND METALLOGRAPHY, 2019,120(1):69-77.

[216] ZHOU P, ZHANG C, XU K, et al. Defect Detection of Aluminium Plates Based on Near-Field Enhancement of Lamb Waves Generated Using an Electromagnetic Acoustic Tranducer[J]. SENSORS, 2019,19(352916).

[217] HE D, XU K, ZHOU P. Defect detection of hot rolled steels with a new object detection framework called classification priority network[J]. COMPUTERS & INDUSTRIAL ENGINEERING, 2019,128:290-297.

[218] XU M, LI H, JIANG R, et al. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2019,26(2):173-181.

[219] SHEN Y, LIU J, YANG S, et al. Dendrite growth behavior in directionally solidified Fe-C-Mn-Al alloys[J]. JOURNAL OF CRYSTAL GROWTH, 2019,511:118-126.

[220] LIU X, XU K, ZHOU P, et al. Edge detection of retinal OCT image based on complex shearlet transform[J]. IET IMAGE PROCESSING, 2019,13(10):1686-1693.

[221] ZHANG H, WU Y, LI Q, et al. Effect of matrix structure on mechanical properties and dry rolling-sliding wear performance of alloyed ductile iron[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2019,26(8):888-897.

[222] ZHANG Y, JIANG H, WANG Y, et al. Effects of alloying addition and twin-roll casting process on Mg-2Zn based-alloys with high strength and high formability[J]. MATERIALS RESEARCH EXPRESS, 2019,6(0865768).

[223] ZUO M, CHEN Y, MI Z, et al. Effects of Cr content on corrosion behaviour and corrosion products of spring steels[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2019,26(9):1000-1010.

[224] ZHANG G, JIANG H, TIAN S, et al. Effects of deformation conditions on the microstructure, texture and mechanical properties of Ti6Al4V alloy[J]. MATERIALS RESEARCH EXPRESS, 2019,6(1065b710).

[225] XUE R, WANG X, YANG Q, et al. Grain size characterization of aluminum based on ensemble empirical mode decomposition using a laser ultrasonic technique[J]. APPLIED ACOUSTICS, 2019,156:378-386.

[226] ZHAO J, WANG X, YANG Q, et al. High precision shape model and presetting strategy for strip hot rolling[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019,265:99-111.

[227] TIAN S, JIANG H, GUO W, et al. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy[J]. INTERMETALLICS, 2019,112(UNSP 106521).

[228] HUANG C, HU S, CHEN K. Influence of rolling temperature on the interfaces and mechanical performance of graphene-reinforced aluminum-matrix composites[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019,26(6):752-759.

[229] TIAN S, JIANG H, ZHANG G, et al. Investigation on the initial oxidation behavior of TiAl alloy[J]. MATERIALS RESEARCH EXPRESS, 2019,6(10659510).

[230] YIN Y J, SUN J Q, GUO J, et al. Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019,744:773-777.

[231] KANG Q, JIANG H, KUAI Z, et al. Optimization of the hot compression constitutive equation and processing map of Mg-4Zn-0.8Ca (wt%) alloy[J]. MATERIALS RESEARCH EXPRESS, 2019,6(0865268).

[232] WANG Y, YANG S, WANG F, et al. Optimization on Reducing Slag Entrapment in 150 x 1270 mm Slab Continuous Casting Mold[J]. MATERIALS, 2019,12(177411).

[233] WANG F, MEN C, KONG X, et al. Optimum Design and Application Research of Eddy Current Sensor for Measurement of TBM Disc Cutter Wear[J]. SENSORS, 2019,19(423019).

[234] WANG J, JIANG H, DUAN X, et al. Orientation and microstructure topology-governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019,739:254-263.

[235] DONG X, KEDONG L, QUAN Y, et al. Plane dimension detection with a single camera based on a flat refractive camera model[J]. The Journal of Engineering, 2019,2019(3):647-651.

[236] DUAN X, MI Z, JIANG H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. MATERIALS RESEARCH EXPRESS, 2019,6(0765767).

[237] GUO W, JIANG H, WANG S, et al. Self-sharpening ability enhanced by torque gradient in twisted tungsten-fiber-reinforced Cu-Zn matrix composite[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019,794:396-401.

[238] SHEN Y, YANG S, LIU J, et al. Study on Micro Segregation of High Alloy Fe-Mn-C-Al Steel[J]. STEEL RESEARCH INTERNATIONAL, 2019,90(18005465).

[239] ZHANG S, WANG F, YANG S, et al. Sulfide Transformation with Tellurium Treatment for Y15 Free-Cutting Steel[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019,50(5):2284-2295.

[240] WANG J, MI Z, JIANG H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. JOURNAL OF MATERIALS SCIENCE, 2019,54(8):6608-6623.

[241] GAO Z, LI J, WANG Y. The Crystallographic Textures and Anisotropy in 2507 Super Duplex Stainless Steel[J]. STEEL RESEARCH INTERNATIONAL, 2019,90(18003972).

[242] ZHANG J, HE Y, LIU J, et al. The effects of Soluble Gas Floatation Technology on the flow field of ladle and inclusion removal in RH refine process[J]. VACUUM, 2019,168(UNSP 108803).

[243] ZHANG J, LIU J, YU S, et al. Theoretical analysis of bubbles nucleating on surfaces of convex spherical inclusions in molten steel during vacuum treatment[J]. VACUUM, 2019,163:176-185.

[244] PENGWEI L, WEICUN Z. Towards a unified stability analysis of continuous-time T-S model-based fuzzy control systems[J]. International Journal of Modelling, Identification and Control, 2019,31(2):113-123.

[245] XIE L, HE A, LIU C. A rapid calculation method for predicting roll deformation of six-high rolling mill[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018,25(9):901-909.

[246] ZHANG K, LIU J, CUI H, et al. Analysis of Meniscus Fluctuation in a Continuous Casting Slab Mold[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2018,49(3):1174-1184.

[247] SU X, JI Y, LIU J, et al. Analysis on Residence Time Distribution Curve of Continuous Casting Tundish by Combined Model[J]. STEEL RESEARCH INTERNATIONAL, 2018,89(180008512SI).

[248] XU K, XU Y, ZHOU P, et al. Application of RNAMlet to surface defect identification of steels[J]. OPTICS AND LASERS IN ENGINEERING, 2018,105:110-117.

[249] YANG Y, MI Z, XU M, et al. Bending deformation and fracture characterisation in quenching and partitioning steel[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2018,34(11):1379-1387.

[250] CHENG L, CAI Q, YU W, et al. Coarsening of nanoscale (Ti,Mo)C precipitates in different ferritic matrixes[J]. MATERIALS CHARACTERIZATION, 2018,142:195-202.

[251] JIANG H, ZHANG G, GUO W, et al. Deformation Behavior of Ti2AlNb-Based Alloy during Dynamic Compression[J]. ADVANCED ENGINEERING MATERIALS, 2018,20(180028110).

[252] XU M, MI Z, LI H, et al. Deformation mechanism transition in Fe-17Mn-0.4C-0.06V TWIP steel with different strain rates[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2018,34(2):242-251.

[253] HE J, XU K, REN W. Designs for improving electromagnetic acoustic transducers' excitation performance[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2018,57(0672026).

[254] ZHUANG C, LIU J. Determination of liquidus temperatures in high-alloyed Fe-C-Mn-Si-Al steels using differential thermal analysis[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018,25(5):546-553.

[255] GUO W, WANG Y, LIU K, et al. Effect of copper content on the dynamic compressive properties of fine-grained tungsten copper alloys[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018,727:140-147.

[256] WU H, WU T, NIU G, et al. Effect of the frequency of high-angle grain boundaries on the corrosion performance of 5wt%Cr steel in a CO2 aqueous environment[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2018,25(3):315-324.

[257] KANG Q, JIANG H, ZHANG Y, et al. Effect of various Ca content on microstructure and fracture toughness of extruded Mg-2Zn alloys[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018,742:1019-1030.

[258] XU L, WU H, TANG Q. Effects of Coiling Temperature on Microstructure and Precipitation Behavior in Nb-Ti Microalloyed Steels[J]. ISIJ INTERNATIONAL, 2018,58(6):1086-1093.

[259] CHENG L, YU W, CAI Q, et al. Effects of prior microstructures and deformation parameters on the ultra-refining uniformity of Ti-Mo ferritic steel[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018,733:108-116.

[260] YANG Y, MI Z, LI H, et al. Effects of Shear Strain on Orientation Gradients, the Instability of Austenite Diffraction Peak, and Microstructure in Twinning-Induced Plasticity (TWIP) Steels[J]. STEEL RESEARCH INTERNATIONAL, 2018,89(UNSP 17002732).

[261] REN W, HE J, DIXON S, et al. Enhancement of EMAT's efficiency by using silicon steel laminations back-plate[J]. SENSORS AND ACTUATORS A-PHYSICAL, 2018,274:189-198.

[262] DONG X, QUAN Y, FENG D, et al. Evaluation of surface roughness of a machined metal surface based on laser speckle pattern[J]. The Journal of Engineering, 2018,2018(9):773-778.

[263] ZENG S, ZHAO A, JIANG H, et al. Evolution of Surface Morphology of Oxide Formed During Initial-Stage Oxidation of gamma-TiAl Alloy Using In Situ Environmental SEM[J]. OXIDATION OF METALS, 2018,90(5-6):649-655.

[264] LIU X, CAO J, CHAI X, et al. Experimental and numerical prediction of the local thickness reduction defect of complex cross-sectional steel in cold roll forming[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018,95(5-8):1837-1848.

[265] REN W, XU K, ZHOU P. Fast Measurement of Magnetostriction Coefficients for Silicon Steel Strips Using Magnetostriction-Based EMAT[J]. SENSORS, 2018,18(449512).

[266] HAO P, HE A, SUN W. Formation mechanism and control methods of inhomogeneous deformation during hot rough rolling of aluminum alloy plate[J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2018,18(1):245-255.

[267] NIU G, WU H, ZHANG D, et al. Heterogeneous nano/ultrafine-grained medium Mn austenitic stainless steel with high strength and ductility[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018,725:187-195.

[268] JIANG H, TIAN S, GUO W, et al. Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018,719:104-111.

[269] YANG Y, MI Z, XU M, et al. Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018,725:389-397.

[270] XU L, WU H, WANG X. Influence of Microstructural Evolution on the Hot Deformation Behavior of an Fe-Mn-Al Duplex Lightweight Steel[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2018,31(4):389-400.

[271] DONG F, WANG X, YANG Q, et al. In-situ measurement of Ti-6Al-4V grain size distribution using laser-ultrasonic technique[J]. SCRIPTA MATERIALIA, 2018,154:40-44.

[272] CAO J, CHAI X, LI Y, et al. Integrated design of roll contours for strip edge drop and crown control in tandem cold rolling mills[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018,252:432-439.

[273] HE Y, LIU J, QIU S, et al. Interfacial morphology evolution in directionally solidified FeCrAl alloys[J]. MATERIALS CHARACTERIZATION, 2018,139:303-310.

[274] XIAO L, ZHANG Y, PENG G. Landslide Susceptibility Assessment Using Integrated Deep Learning Algorithm along the China-Nepal Highway[J]. SENSORS, 2018,18(443612).

[275] HE Y, LIU J, QIU S, et al. Microstructure and high temperature mechanical properties of as-cast FeCrAl alloys[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018,726:56-63.

[276] DONG C, ZHAO A, WANG X, et al. Microstructure and properties of 1100 MPa grade low-carbon hot-rolled steel by laser welding[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018,25(2):228-234.

[277] DENG Z, LIU J, YAN B, et al. Monotonous deformation behavior of ferritic FeCrAl alloy in the dynamic strain aging regime[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018,749:664-671.

[278] HAO P, HE A, SUN W. Predicting model of thickness distribution and rolling force in angular rolling process based on influence function method[J]. MECHANICS & INDUSTRY, 2018,19(3).

[279] ZHOU P, XU K, WANG D. Rail Profile Measurement Based on Line-structured Light Vision[J]. IEEE ACCESS, 2018,6:16423.

[280] QIU Z, HE A, SHAO J, et al. Reduction of Residual Stress for High-Strength Low-Alloy Steel Strip Based on Finite Element Analysis[J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018(8131909).

[281] LI Y, CAO J, QIU L, et al. Research on ASR work roll contour suitable for all width electrical steel strip during hot rolling process[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018,97(9-12):3453-3458.

[282] LI X, HE F, XU K. Research on Grain Detection of Grain-Oriented Silicon Steel Based on Two-Dimensional X-Ray Diffraction[J]. MATERIALS TRANSACTIONS, 2018,59(3):367-372.

[283] GUANGYI S, QUAN Y, XIAOCHEN W. Research on Wear Evolution Laws of the Work Rolls during Hot Temper Rolling Process[J]. Journal of Failure Analysis and Prevention, 2018,18(4):912-919.

[284] SONG G, WANG X, YANG Q. Study on mathematical model of work roll wear in skin-pass rolling of hot steel strip[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018,97(5-8):2675-2686.

[285] YU Z, MI Z, GUO J, et al. Studying inhomogeneous deformation of bainite-retained austenite steel during cold drawing[J]. MATERIALS RESEARCH EXPRESS, 2018,5(0965189).

[286] CHENG L, CAI Q, LV J, et al. Superdense microbands strengthening of textured low alloy ferritic steel[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018,746:482-489.

[287] WANG X, CHEN Y, NIU G. The study on corrosion resistance of high-strength spring steel[J]. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2018,53(1):54-64.

[288] LI H, XU M, LI Z. Transformation behavior and acceleration of low-temperature bainite in high carbon chrominum steel[J]. MATERIALS RESEARCH EXPRESS, 2018,5(0765207).

[289] WANG X, DING R, HE J, et al. Ultrafine-Grained Multiphase Steels with Different Microstructural Constitutions Fabricated Through Annealing of Tempered and Deformed Martensite[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018,49A(5):1439-1443.

[290] YIN Y, SUN J, ZHAO A, et al. Ultra-low-carbon steel spheroidization and torsion[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018,25(9):968-974.

[291] XIAO X, ZHANG Y, SONG X, et al. Virtual Flux Direct Power Control for PWM Rectifiers Based on an Adaptive Sliding Mode Observer[J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2018,54(5SI2):5196-5205.

[292] ZHANG Y, ZHAO J, ZHANG F, et al. Approximate finite-time control for a class of uncertain nonlinear systems with dynamic compensation[J]. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 2017,27(18):4296-4311.

[293] JI Y, SHEN S, LIU J, et al. Cleaner and effective process for extracting vanadium from vanadium slag by using an innovative three-phase roasting reaction[J]. JOURNAL OF CLEANER PRODUCTION, 2017,149:1068-1078.

[294] DONG F, WANG X, YANG Q, et al. Directional dependence of aluminum grain size measurement by laser-ultrasonic technique[J]. MATERIALS CHARACTERIZATION, 2017,129:114-120.

[295] NING D, SUN S, ZHANG F, et al. Disturbance observer based Takagi-Sugeno fuzzy control for an active seat suspension[J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017,93:515-530.

[296] SUN S, ZHAO A, ZENG Q, et al. Effect of Continuous Annealing Temperature on Microstructure and Properties of Ultra-Purified Ferritic Stainless Steel[J]. STEEL RESEARCH INTERNATIONAL, 2017,88(UNSP 16003477).

[297] GONG N, WU H, NIU G, et al. Effect of martensitic transformation on nano/ultrafine-grained structure in 304 austenitic stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2017,24(12):1231-1237.

[298] LIU H, LIU J, WU B, et al. Effect of Mn and Al contents on hot ductility of high alloy Fe-xMn-C-yAl austenite TWIP steels[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017,708:360-374.

[299] LIU C, HE A, QIANG Y, et al. Effect of Phase Transformation and Latent Heat on Hot Rolling Deformation Behavior of Non-oriented Electrical Steel[J]. ISIJ INTERNATIONAL, 2017,57(5):857-865.

[300] SUN S, ZHAO A, WU Q. Effect of strain rate on the work-hardening rate in high-Mn steel[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2017,33(11):1306-1311.

[301] YUN Y, CAI Q, XIE B, et al. Effect of tempering temperature on strain hardening exponent and flow stress curve of 1000 MPa grade steel for construction machinery[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2017,24(9):950-956.

[302] SUN Q, LI Z, MI Z, et al. Effect of Typical Elements on the Heredity of Hot-rolled and Annealed Texture in Non-oriented Electrical Steel[J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2017,32(6):1446-1452.

[303] LIU C, HE A, QIANG Y, et al. Effect of Volume Changes on Hot Rolling Deformation Behavior of Non-oriented Electrical Steel[J]. ISIJ INTERNATIONAL, 2017,57(9):1595-1602.

[304] GONG N, WU H, NIU G, et al. Effects of annealing temperature on nano/ultrafine-grained structure in austenite stainless steel[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2017,33(14):1667-1672.

[305] FAN H, ZHAO A, LI Q, et al. Effects of ausforming strain on bainite transformation in nanostructured bainite steel[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017,24(3):264-270.

[306] WANG Y, CAI Q, LI G, et al. Effects of Reduction Pretreatment on the Internal Quality of Casting Billets[J]. STEEL RESEARCH INTERNATIONAL, 2017,88(UNSP 16003376).

[307] XU M, YANG Y, CHEN J, et al. Effects of strain states on stability of retained austenite in medium Mn steels[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2017,24(11):1125-1130.

[308] ZENG S, ZHAO A, JIANG H, et al. Flow behavior and processing maps of Ti-44.5Al-3.8Nb-1.0Mo-0.3Si-0.1B alloy[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017,698:786-793.

[309] JI Y, SHEN S, LIU J, et al. Green and Efficient Process for Extracting Chromium from Vanadium Slag by an Innovative Three-Phase Roasting Reaction[J]. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2017,5(7):6008-6015.

[310] LIU C, HE A, QIANG Y, et al. High-Temperature United Constitutive Model of Non-Oriented Electrical Steel Based on Transformation Kinetics Equation and Dislocation Density Theory[J]. STEEL RESEARCH INTERNATIONAL, 2017,88(UNSP 170009711).

[311] LI Z, DANG N, JIANG H, et al. Influence of Temperature on the Texture Distribution in Two-Phase Region Hot Deformation of Grain-Oriented Silicon Steel[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017,26(11):5439-5445.

[312] LIU H, LIU J, WU B, et al. Influence of Ti on the Hot Ductility of High-manganese Austenitic Steels[J]. HIGH TEMPERATURE MATERIALS AND PROCESSES, 2017,36(7):725-732.

[313] LIU X, CAO J, CHAI X, et al. Investigation of forming parameters on springback for ultra high strength steel considering Young's modulus variation in cold roll forming[J]. JOURNAL OF MANUFACTURING PROCESSES, 2017,29:289-297.

[314] LI T, CASTRO P M, LV Z. Life cycle assessment and optimization of an iron making system with a combined cycle power plant: a case study from China[J]. CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2017,19(4):1133-1145.

[315] LI Z, DANG N, JIANG H, et al. Mechanism of Texture and Precipitates Evolution in CGO Silicon Steel During High-Temperature Annealing Process[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017,26(11):5432-5438.

[316] JIANG H T, ZENG S W, TIAN S W, et al. Microstructural Evolution and Dynamic Recrystallization Behavior of beta-gamma TiAl-based Alloy during Hot Compression[J]. ADVANCED ENGINEERING MATERIALS, 2017,19(16005462).

[317] HE Y, LIU J, QIU S, et al. Microstructure evolution and mechanical properties of Al-La alloys with varying La contents[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017,701:134-142.

[318] HE Y, LIU J, HAN Z, et al. Phase transformation and precipitation during solidification of FeCrAl alloy for automobile exhaust gas purifying systems[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017,714:251-257.

[319] CHENG L, CHEN Y, CAI Q, et al. Precipitation enhanced ultragrain refinement of Ti-Mo microalloyed ferritic steel during warm rolling[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017,698:117-125.

[320] XIE B, CAI Q, YU W, et al. Prediction for Flow Stress of 95CrMo Hollow Steel During Hot Compression[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2017,30(3):250-260.

[321] WANG L, TANG D, SONG Y. Prediction of mechanical behavior of ferrite-pearlite steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2017,24(3):321-327.

[322] XIAO-XU D, AN-RUI H, WEN-QUAN S, et al. Research on a 3D Temperature Field Model of a Slab with Oxide Layer Growth[J]. Heat Transfer - Asian Research, 2017,46(2):147-159.

[323] LIU J, SU X, LIU H, et al. Solidification interface transformation and solute redistribution of FeCrAl stainless steel[J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2017,114(4094).

[324] LI K, LIU J, ZHANG J, et al. Theoretical Analysis of Bubble Nucleation in Molten Steel Supersaturated with Nitrogen or Hydrogen[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2017,48(4):2136-2146.

[325] GUO H, ZHAO A, ZHI C, et al. Two-body abrasion wear mechanism of super bainitic steel[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2017,33(7):893-898.

[326] XIE B, CAI Q, YU W, et al. A Flow Stress Model for High Strength Steels with Low Carbon Bainite Structure[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016,23(4):372-379.

[327] HUANG Y, ZHAO A, WANG X, et al. A High-Strength High-Ductility Ti- and Mo-Bearing Ferritic Steel[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016,47A(1):450-460.

[328] LI D, CUI H, LIU Y, et al. A New Method Based on the F-Curve for Characterizing Fluid Flow in Continuous Casting Tundishes[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016,47(2):1237-1242.

[329] ZHANG F, ZONG S, WANG X, et al. An Expert PI Controller with Dead Time Compensation of Monitor AGC in Hot Strip Mill[J]. MATHEMATICAL PROBLEMS IN ENGINEERING, 2016(3041538).

[330] XIAO X, ZHANG Y, WANG J, et al. An Improved Model Predictive Control Scheme for the PWM Rectifier-Inverter System Based on Power-Balancing Mechanism[J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2016,63(8):5197-5208.

[331] XIAO H, ZHOU X, SHAO Y. Application of an improved dynamic time synchronous averaging method for fault diagnosis in conditions of speed fluctuation and no tachometer[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016,230(14):2517-2531.

[332] LIU H, LIU J, MICHELIC S, et al. Characteristics of AlN inclusions in low carbon Fe-Mn-Si-Al TWIP steel produced by AOD-ESR method[J]. IRONMAKING & STEELMAKING, 2016,43(3):171-179.

[333] LIU H, LIU J, MICHELIC S K, et al. Characterization and Analysis of Non-Metallic Inclusions in Low-Carbon Fe-Mn-Si-Al TWIP Steels[J]. STEEL RESEARCH INTERNATIONAL, 2016,87(12):1723-1732.

[334] JU B, WU H, TANG D, et al. Characterization of (Nb, Ti,Mo)C Precipitates in an Ultrahigh Strength Martensitic Steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016,23(5):495-500.

[335] JIANG H, XU H. Dynamic Flow Stress Characteristics and Constitutive Relation of Q345-TA2[J]. RARE METAL MATERIALS AND ENGINEERING, 2016,45(12):3192-3196.

[336] LIN L, BAO Y, WANG M, et al. Effect of MgO and MnO on Phosphorus Utilization in P-Bearing Steelmaking Slag[J]. HIGH TEMPERATURE MATERIALS AND PROCESSES, 2016,35(4):425-432.

[337] YU W, XIE B, WANG B, et al. Effect of Rolling Process on Microstructure and Properties of 95CrMo Drill Steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016,23(9):910-916.

[338] NIU G, CHEN Y, WU H, et al. Effects of Chromium, Vanadium and Austenite Deformation on Transformation Behaviors of High-strength Spring Steels[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016,23(12):1323-1332.

[339] JIANG H, DONG P, ZENG S, et al. Effects of Recrystallization on Microstructure and Texture Evolution of Cold-Rolled Ti-6Al-4V Alloy[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016,25(5):1931-1938.

[340] LIU J, ZHU W, CHARALAMBIDES P G, et al. Four-Beam Model for Vibration Analysis of a Cantilever Beam with an Embedded Horizontal Crack[J]. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2016,29(1):163-179.

[341] JIANG H, ZENG S, ZHAO A, et al. Hot deformation behavior of beta phase containing gamma-TiAl alloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016,661:160-167.

[342] CHENG L, CAI Q, DONG E, et al. Influence of ferrite matrix and precipitation status on the mechanical properties of low carbon low alloy steel during high temperature tension[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016,678:1-9.

[343] LI Z, DANG N, MI Z. Influence of Temperature on Typical Texture Distribution in Primary Recrystallization Matrix of 3% Si CGO Silicon Steel[J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2016(8936805).

[344] WU H, WANG D, ZHANG P, et al. Influences of Alloying Elements on Oxidation Behavior of Steels and Microstructure of Oxide Scales[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016,23(3):231-237.

[345] JI Y, SHEN S, LIU J, et al. Mechanisms Involved in the Roasting of Pellets Composed of Stainless Steel Slag and Sodium Hydroxide to Extract Chromium[J]. ISIJ INTERNATIONAL, 2016,56(10):1751-1757.

[346] KOU M, WU S, MA X, et al. Phase Equilibrium Studies of CaO-SiO2-MgO-Al2O3 System with Binary Basicity of 1.5 Related to Blast Furnace Slag[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016,47(2):1093-1102.

[347] SUI X, LV Z. Prediction of the mechanical properties of hot rolling products by using attribute reduction ELM[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016,85(5-8):1395-1403.

[348] GUO H, ZHAO A, DING R, et al. Quenching and partitioning steel produced through hot rolling, direct quenching and annealing[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2016,32(15):1605-1612.

[349] CHENG L, CAI Q, XIE B, et al. Relationships among microstructure, precipitation and mechanical properties in different depths of Ti-Mo low carbon low alloy steel plate[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016,651:185-191.

[350] SUN W Q, ZHANG X Y, HE A R, et al. Research on ridge buckle of high accuracy cold rolled thin strip at local high points during the coiling process[J]. METALLURGIA ITALIANA, 2016(1):45-52.

[351] ZHAO L, WANG J, ZHANG W. Smooth Adaptive Internal Model Control Based on U Model for Nonlinear Systems with Dynamic Uncertainties[J]. MATHEMATICAL PROBLEMS IN ENGINEERING, 2016(2926914).

[352] CHEN Y, BAO Y, WANG M, et al. Superior machinability of steel enhanced with BN and MnS particles[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2016,23(3):276-282.

[353] XU S, YU W, LI S, et al. Effects of Pre-Deformation Temperature on Nanobainite Transformation Kinetics and Microstructure[J]. ACTA METALLURGICA SINICA, 2018,54(8):1113-1121.

[354] HU Z, LIU J, LI S, et al. Preparation and anisotropic compressive deformation behaviors of tungsten fiber reinforced Cu-Zn matrix composite[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017,708:43-49.

[355] FANG Z, LI J, CHEN Y, et al. RESEARCH ON RIDGING OF 17%Cr ULTRA PURE FERRITIC STAINLESS STEEL AFTER ENLONGATED ALONG VARIOUS DIRECTIONS[J]. ACTA METALLURGICA SINICA, 2016,52(1):33-40.

[356] ZHANG Y, WANG X, YANG Q, et al. Characterization of mean grain size of interstitial-free steel based on laser ultrasonic[J]. JOURNAL OF MATERIALS SCIENCE, 2018,53(11):8510-8522.

[357] ZHOU P, CHEN J, LIU M, et al. Microwave absorption properties of SiC@SiO2@Fe3O4 hybrids in the 2-18 GHz range[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017,24(7):804-813.