Manufacturer: Zwick (Germany)

Equipment model: HTM 16020

Location: Room 116 of Science and Technology Building

Person-in-charge: Chen Guangxiu

Tel.: 62332598-6205

Main functions:

The equipment is hydraulically loaded with high-performance isostatic pressing actuators that can reach linear speeds up to 20 m/s, and high-performance control measurement systems for tension, bending, compression, shearing or compound tests, to accurately measure the physical and mechanical properties, stress/strain parameters, etc. of metal, composite materials, plastics and other materials and parts under instantaneous load impact under high strain rate.

It is widely used in new materials research and development, aerospace and automotive fields and other fields, such as for measuring the stress/strain performance parameters of automotive panels and impact shock-absorbing components of load under high strain rate, for software simulation tests of high-speed collision of vehicles. Test data accuracy and reliability are much higher than those obtained by static tensile test.

Main technical parameters:

Nominal load: 160 kN

Max. impact load: 100 kN (at a speed of 20 m/s)

Total piston stroke: 400 mm (including the limit buffer stroke at both ends)

Nominal stroke: 300 mm

Max. testing speed: 20 m/s)

Min. testing speed: 0.01 m/s

Max. strain rate: 1 × 103 s^-1 (corresponding to 20 mm gauge length)

Integrated digital displacement sensor resolution: 20 μm

High-speed data acquisition card: 10 MHz, 12 bits

Laboratory appointment:

http://202.204.49.249/Equipment/Show?Id=ff59809a-a884-4615-b544-5709dfedbd62